[PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
Konrad Dybcio
konrad.dybcio at linaro.org
Fri Apr 14 03:57:13 PDT 2023
On 14.04.2023 12:01, Devi Priya wrote:
>
>
> On 4/13/2023 2:16 AM, Konrad Dybcio wrote:
>>
>>
>> On 10.04.2023 15:59, Devi Priya wrote:
>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>> family of SoCs
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
>>> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>>> ---
>>
>>> + soc: soc at 0 {
>>> + compatible = "simple-bus";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0 0 0 0xffffffff>;
>> this is equal to:
>>
>> ranges;
>
> Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;)
> we see the below warnings:
> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
> /soc at 0:ranges: empty "ranges" property but its #address-cells (1)
> differs from / (2)
> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc at 0:ranges: empty "ranges" property but its #size-cells (1) differs
> from / (2)
>
> Looks like, empty ranges property isn't supported if the parent and
> child address spaces are non-identical.
> Would you suggest to retain the ranges as such?
> (ranges = <0 0 0 0xffffffff>;)
>
> Thanks,
> Devi Priya
Oh right, you have address/size cells = 2 at the top level.
Forget about this change.
Konrad
>>
>> Could you fix that up when applying, Bjorn, should there be
>> no other issues?
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>>
> Thank you!
>> Konrad
>>
>>> +
>>> + tlmm: pinctrl at 1000000 {
>>> + compatible = "qcom,ipq9574-tlmm";
>>> + reg = <0x01000000 0x300000>;
>>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> + gpio-controller;
>>> + #gpio-cells = <2>;
>>> + gpio-ranges = <&tlmm 0 0 65>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> +
>>> + uart2_pins: uart2-state {
>>> + pins = "gpio34", "gpio35";
>>> + function = "blsp2_uart";
>>> + drive-strength = <8>;
>>> + bias-disable;
>>> + };
>>> + };
>>> +
>>> + gcc: clock-controller at 1800000 {
>>> + compatible = "qcom,ipq9574-gcc";
>>> + reg = <0x01800000 0x80000>;
>>> + clocks = <&xo_board_clk>,
>>> + <&sleep_clk>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>;
>>> + #clock-cells = <1>;
>>> + #reset-cells = <1>;
>>> + #power-domain-cells = <1>;
>>> + };
>>> +
>>> + sdhc_1: mmc at 7804000 {
>>> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>> + reg-names = "hc", "cqhci";
>>> +
>>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hc_irq", "pwr_irq";
>>> +
>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>> + <&xo_board_clk>;
>>> + clock-names = "iface", "core", "xo";
>>> + non-removable;
>>> + status = "disabled";
>>> + };
>>> +
>>> + blsp1_uart2: serial at 78b1000 {
>>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>> + reg = <0x078b1000 0x200>;
>>> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
>>> + <&gcc GCC_BLSP1_AHB_CLK>;
>>> + clock-names = "core", "iface";
>>> + status = "disabled";
>>> + };
>>> +
>>> + intc: interrupt-controller at b000000 {
>>> + compatible = "qcom,msm-qgic2";
>>> + reg = <0x0b000000 0x1000>, /* GICD */
>>> + <0x0b002000 0x2000>, /* GICC */
>>> + <0x0b001000 0x1000>, /* GICH */
>>> + <0x0b004000 0x2000>; /* GICV */
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <3>;
>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>> + ranges = <0 0x0b00c000 0x3000>;
>>> +
>>> + v2m0: v2m at 0 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00000000 0xffd>;
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m1: v2m at 1000 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00001000 0xffd>;
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m2: v2m at 2000 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00002000 0xffd>;
>>> + msi-controller;
>>> + };
>>> + };
>>> +
>>> + timer at b120000 {
>>> + compatible = "arm,armv7-timer-mem";
>>> + reg = <0x0b120000 0x1000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + frame at b120000 {
>>> + reg = <0x0b121000 0x1000>,
>>> + <0x0b122000 0x1000>;
>>> + frame-number = <0>;
>>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> + };
>>> +
>>> + frame at b123000 {
>>> + reg = <0x0b123000 0x1000>;
>>> + frame-number = <1>;
>>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame at b124000 {
>>> + reg = <0x0b124000 0x1000>;
>>> + frame-number = <2>;
>>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame at b125000 {
>>> + reg = <0x0b125000 0x1000>;
>>> + frame-number = <3>;
>>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame at b126000 {
>>> + reg = <0x0b126000 0x1000>;
>>> + frame-number = <4>;
>>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame at b127000 {
>>> + reg = <0x0b127000 0x1000>;
>>> + frame-number = <5>;
>>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame at b128000 {
>>> + reg = <0x0b128000 0x1000>;
>>> + frame-number = <6>;
>>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>> + };
>>> +};
More information about the linux-arm-kernel
mailing list