[PATCH 2/3] soc: imx: imx8mp-blk-ctrl: enable global pixclk with HDMI_TX_PHY PD

[Lucas Stach]

NXP internal information shows that the PHY refclk is gated by the
GLOBAL_TX_PIX_CLK_EN bit, so to allow the PHY PLL to lock without the
LCDIF being already active, tie this bit to the HDMI_TX_PHY power
domain.

Fixes: e3442022f543 ("soc: imx: add i.MX8MP HDMI blk-ctrl")
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 drivers/soc/imx/imx8mp-blk-ctrl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-blk-ctrl.c
index 9401df25c85a..73f672104aaa 100644
--- a/drivers/soc/imx/imx8mp-blk-ctrl.c
+++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
@@ -192,7 +192,7 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 		break;
 	case IMX8MP_HDMIBLK_PD_LCDIF:
 		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
-				BIT(7) | BIT(16) | BIT(17) | BIT(18) |
+				BIT(16) | BIT(17) | BIT(18) |
 				BIT(19) | BIT(20));
 		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
 		regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
@@ -221,6 +221,7 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 		regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(1));
 		break;
 	case IMX8MP_HDMIBLK_PD_HDMI_TX_PHY:
+		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(7));
 		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
 		regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
 		regmap_clear_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
@@ -243,7 +244,7 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 				  BIT(4) | BIT(5) | BIT(6));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
-				  BIT(7) | BIT(16) | BIT(17) | BIT(18) |
+				  BIT(16) | BIT(17) | BIT(18) |
 				  BIT(19) | BIT(20));
 		break;
 	case IMX8MP_HDMIBLK_PD_PAI:
@@ -271,6 +272,7 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 	case IMX8MP_HDMIBLK_PD_HDMI_TX_PHY:
 		regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
+		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(7));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
 		break;
 	default:
-- 
2.30.2