[PATCH 1/3] soc: imx: imx8mp-blk-ctrl: don't set power device name in

[Peng Fan]

> Subject: [PATCH 1/3] soc: imx: imx8mp-blk-ctrl: don't set power device
> name in
> 
> Setting the device name after it has been registered confuses the sysfs
> cleanup paths. This has already been fixed for the imx8m-blk-ctrl driver in
> b64b46fbaa1d ("Revert "soc: imx: imx8m-blk-ctrl: set power device name""),
> but the same problem exists in imx8mp-blk-ctrl.
> 
> Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>

Reviewed-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/soc/imx/imx8mp-blk-ctrl.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-
> blk-ctrl.c
> index 4ca2ede6871b..9401df25c85a 100644
> --- a/drivers/soc/imx/imx8mp-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
> @@ -529,7 +529,6 @@ static int imx8mp_blk_ctrl_probe(struct
> platform_device *pdev)
>  			ret = PTR_ERR(domain->power_dev);
>  			goto cleanup_pds;
>  		}
> -		dev_set_name(domain->power_dev, "%s", data->name);
> 
>  		domain->genpd.name = data->name;
>  		domain->genpd.power_on = imx8mp_blk_ctrl_power_on;
> --
> 2.30.2