[PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie support
Richard Zhu
hongxing.zhu at nxp.com
Tue Oct 19 19:10:32 PDT 2021
> -----Original Message-----
> From: Tim Harvey <tharvey at gateworks.com>
> Sent: Tuesday, October 19, 2021 11:53 PM
> To: Richard Zhu <hongxing.zhu at nxp.com>
> Cc: Lucas Stach <l.stach at pengutronix.de>; Kishon Vijay Abraham I
> <kishon at ti.com>; vkoul at kernel.org; Rob Herring <robh at kernel.org>;
> galak at kernel.crashing.org; Shawn Guo <shawnguo at kernel.org>;
> linux-phy at lists.infradead.org; Device Tree Mailing List
> <devicetree at vger.kernel.org>; Linux ARM Mailing List
> <linux-arm-kernel at lists.infradead.org>; open list
> <linux-kernel at vger.kernel.org>; Sascha Hauer <kernel at pengutronix.de>;
> dl-linux-imx <linux-imx at nxp.com>
> Subject: Re: [PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie
> support
>
> On Mon, Oct 18, 2021 at 7:10 PM Richard Zhu <hongxing.zhu at nxp.com>
> wrote:
> >
> >
> > > -----Original Message-----
> > > From: Tim Harvey <tharvey at gateworks.com>
> > > Sent: Saturday, October 16, 2021 3:59 AM
> > > To: Richard Zhu <hongxing.zhu at nxp.com>; Lucas Stach
> > > <l.stach at pengutronix.de>
> > > Cc: Kishon Vijay Abraham I <kishon at ti.com>; vkoul at kernel.org; Rob
> > > Herring <robh at kernel.org>; galak at kernel.crashing.org; Shawn Guo
> > > <shawnguo at kernel.org>; linux-phy at lists.infradead.org; Device Tree
> > > Mailing List <devicetree at vger.kernel.org>; Linux ARM Mailing List
> > > <linux-arm-kernel at lists.infradead.org>; open list
> > > <linux-kernel at vger.kernel.org>; Sascha Hauer
> > > <kernel at pengutronix.de>; dl-linux-imx <linux-imx at nxp.com>
> > > Subject: Re: [PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm
> > > pcie support
> > >
> > > On Tue, Oct 12, 2021 at 2:06 AM Richard Zhu <hongxing.zhu at nxp.com>
> > > wrote:
> > > >
> > > > refer to the discussion [1] when try to enable i.MX8MM PCIe
> > > > support, one standalone PCIe PHY driver should be seperated from
> > > > i.MX PCIe driver when enable i.MX8MM PCIe support.
> > > >
> > > > This patch-set adds the standalone PCIe PHY driver suport[1-5],
> > > > and i.MX8MM PCIe support[6-9] to have whole view to review this
> patch-set.
> > > >
> > > > The PCIe works on i.MX8MM EVK board based the the blkctrl power
> > > > driver [2] and this PHY driver patch-set.
> > > >
> > > > [1]
> > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F
> > > > patc
> > > >
> > >
> hwork.ozlabs.org%2Fproject%2Flinux-pci%2Fpatch%2F20210510141509.929
> > > 120
> > > >
> > >
> -3-l.stach%40pengutronix.de%2F&data=04%7C01%7Chongxing.zhu%40
> > > nxp.c
> > > >
> > >
> om%7C4e3d8ee008d94327f99108d9901634be%7C686ea1d3bc2b4c6fa92cd
> > > 99c5c3016
> > > >
> > >
> 35%7C0%7C0%7C637699247319711209%7CUnknown%7CTWFpbGZsb3d8ey
> > > JWIjoiMC4wLj
> > > >
> > >
> AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&
> > > ;sdata=
> > > >
> > >
> Z2TZCpdDUSoqrNB1X%2BXdoYNBe3dBDKUgkA4r%2F0TcdOg%3D&reser
> > > ved=0
> > > > [2]
> > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F
> > > > patc
> > > >
> > >
> hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202109102026
> > > 40
> > > > .980366-1-l.stach%40pengutronix.de%2F&data=04%7C01%7Chon
> gxin
> > > g.zhu%
> > > >
> > >
> 40nxp.com%7C4e3d8ee008d94327f99108d9901634be%7C686ea1d3bc2b4c6
> > > fa92cd99
> > > >
> > >
> c5c301635%7C0%7C0%7C637699247319711209%7CUnknown%7CTWFpbGZ
> > > sb3d8eyJWIjo
> > > >
> > >
> iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C10
> > > 00&
> > > > ;sdata=5h%2By%2FcBW%2BjFkyplUuN1nB5%2BAFHuwCUJBqvRh1RiPY
> Mo
> > > %3D&rese
> > > > rved=0
> > > >
> > > > Main changes v2 --> v3:
> > > > - Regarding Lucas' comments.
> > > > - to have a whole view to review the patches, send out the
> > > > i.MX8MM PCIe
> > > support too.
> > > > - move the PHY related bits manipulations of the GPR/SRC to
> > > > standalone
> > > PHY driver.
> > > > - split the dts changes to SOC and board DT, and use the enum
> > > > instead of
> > > raw value.
> > > > - update the license of the dt-binding header file.
> > > >
> > > > Changes v1 --> v2:
> > > > - Update the license of the dt-binding header file to make the license
> > > > compatible with dts files.
> > > > - Fix the dt_binding_check errors.
> > > >
> > > > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6
> +++
> > > > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 79
> > > +++++++++++++++++++++++++++++
> > > > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi |
> 53
> > > ++++++++++++++++++++
> > > > arch/arm64/boot/dts/freescale/imx8mm.dtsi |
> > > 46 ++++++++++++++++-
> > > > drivers/pci/controller/dwc/pci-imx6.c |
> 63
> > > ++++++++++++++++++++++-
> > > > drivers/phy/freescale/Kconfig |
> 9
> > > ++++
> > > > drivers/phy/freescale/Makefile |
> 1
> > > +
> > > > drivers/phy/freescale/phy-fsl-imx8m-pcie.c |
> 218
> > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > ++++++++++++++++++
> > > > include/dt-bindings/phy/phy-imx8-pcie.h |
> 14
> > > ++++++
> > > > 9 files changed, 486 insertions(+), 3 deletions(-)
> > > >
> > > > [PATCH v3 1/9] dt-bindings: phy: phy-imx8-pcie: Add binding for
> > > > the [PATCH v3 2/9] dt-bindings: phy: add imx8 pcie phy driver
> > > > support [PATCH v3 3/9] arm64: dts: imx8mm: add the pcie phy
> > > > support [PATCH v3 4/9] arm64: dts: imx8mm-evk: add the pcie phy
> > > > support [PATCH v3 5/9]
> > > > phy: freescale: pcie: initialize the imx8 pcie [PATCH v3 6/9]
> > > > dt-bindings: imx6q-pcie: Add PHY phandles and name [PATCH v3 7/9]
> > > > arm64: dts: imx8mm: add the pcie support [PATCH v3 8/9] arm64: dts:
> > > > imx8mm-evk: add the pcie support on imx8mm [PATCH v3 9/9] PCI: imx:
> > > > add the imx8mm pcie support
> > >
> > > Richard and Lucas,
> > >
> > > Thanks for your collective work on this series!
> > >
> > > I have imx8mm-venice boards to test this on both with and without
> > > PCIe bridges. I've tested this on top of Shawn's imx/for-next (as
> > > blk-ctl has been merged there) and end up hanging waiting for PHY ready
> timeout.
> > [Richard Zhu] Sorry to reply late. I run the tests based on pci/for-next
> applied the blk-ctl issue by Lucas [2] in commit.
> > Can you help to make a re-tests?
> > As I know that the blk-ctl is not merged yet.
> > Hi Lucas:
> > Am I right?
> >
>
> Richard,
>
> v5 of blk-ctl is merged into Shawn's for-next tree.
>
[Richard Zhu] Got that.
Thanks.
> > >
> > > [ 1.454308] imx6q-pcie 33800000.pcie: IO
> > > 0x001ff80000..0x001ff8ffff -> 0x0
> > > [ 1.466538] imx6q-pcie 33800000.pcie: MEM
> > > 0x0018000000..0x001fefffff -> 0x0
> > > [ 1.476344] libphy: fec_enet_mii_bus: probed
> > > [ 1.602631] phy phy-32f00000.pcie-phy.0: phy init failed --> -110
> > > [ 1.608775] imx6q-pcie 33800000.pcie: Waiting for PHY ready
> timeout!
> > >
> > > I can verify that imx8_pcie_phy_probe returns successfully and the
> > > the phy node (imx6_pcie->phy) was found.
> > >
> > > Here is the dt change I made for the imx8mm-venice-gw71xx-0x board
> > > that has no bridge:
> > [Richard Zhu] Refer to the changes, the external OSC is used as PCIe REF
> clock(same to EVK board design), right?
>
> Correct, an ext osc is used like EVK.
>
> I applied v5 blk-ctl and your v3 series on top of pci/next and came up with the
> same issue. Do you have a git repo I could try to make sure I'm not missing
> anything?
>
> Also, as Lucas has requested some changes do you have a v4 coming soon that
> I should wait for to try? I believe this has something to do with the phy reset
> where some of his changes were requested.
[Richard Zhu] Unfortunately, I don't have personal git repo. But I think we stand on same base-line.
I tried on Shawn's next tree with my v3 series today.
PCIe NVME device works fine on my i.MX8MM EVK board, although there is git-am failure in the last patch when I apply the v3 series.
Part of the logs:
"
root at imx8_all:~# lspci
00:00.0 PCI bridge: Synopsys, Inc. Device abcd (rev 01)
01:00.0 Non-Volatile memory controller: Sandisk Corp Device 5002
root at imx8_all:~# uname -a
Linux imx8_all 5.15.0-rc1-00091-g8bd7cd1cc7f0-dirty #1 SMP PREEMPT Wed Oct 20 09:22:32 CST 2021 aarch64 aarch64 aarch64 GNU/Linux
...
[ 1.164144] imx6q-pcie 33800000.pcie: host bridge /soc at 0/pcie at 33800000 ranges:
[ 1.172114] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000
[ 1.182447] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000
[ 1.304429] imx6q-pcie 33800000.pcie: invalid resource
[ 1.316305] imx6q-pcie 33800000.pcie: iATU unroll: enabled
[ 1.321799] imx6q-pcie 33800000.pcie: Detected iATU regions: 4 outbound, 4 inbound
[ 1.429803] imx6q-pcie 33800000.pcie: Link up
[ 1.534497] imx6q-pcie 33800000.pcie: Link up
[ 1.538870] imx6q-pcie 33800000.pcie: Link up, Gen2
[ 1.550364] imx6q-pcie 33800000.pcie: Link up
[ 1.550487] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00
[ 1.565545] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.573834] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.580055] pci_bus 0000:00: root bus resource [mem 0x18000000-0x1fefffff]
[ 1.586968] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[ 1.592997] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 1.599282] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 1.606033] pci 0000:00:00.0: supports D1
[ 1.610053] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.618206] pci 0000:01:00.0: [15b7:5002] type 00 class 0x010802
[ 1.624293] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 1.631177] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit]
[ 1.638409] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 1.664931] pci 0000:00:00.0: BAR 0: assigned [mem 0x18000000-0x180fffff]
[ 1.671745] pci 0000:00:00.0: BAR 14: assigned [mem 0x18100000-0x181fffff]
[ 1.678634] pci 0000:00:00.0: BAR 6: assigned [mem 0x18200000-0x1820ffff pref]
[ 1.685873] pci 0000:01:00.0: BAR 0: assigned [mem 0x18100000-0x18103fff 64bit]
[ 1.693222] pci 0000:01:00.0: BAR 4: assigned [mem 0x18104000-0x181040ff 64bit]
[ 1.700577] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.705814] pci 0000:00:00.0: bridge window [mem 0x18100000-0x181fffff]
[ 1.712972] pcieport 0000:00:00.0: PME: Signaling with IRQ 216
"
Regarding the log you pasted, it seems that the clock is not feed to PHY properly.
Anyway, let's waiting for the v4 series, then make a try. Thanks for your great help to make the double tests.
BR
Richard
>
> Best regards,
>
> Tim
More information about the linux-arm-kernel
mailing list