[PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie support

[Tim Harvey]

On Mon, Oct 18, 2021 at 7:10 PM Richard Zhu <hongxing.zhu at nxp.com> wrote:
>
>
> > -----Original Message-----
> > From: Tim Harvey <tharvey at gateworks.com>
> > Sent: Saturday, October 16, 2021 3:59 AM
> > To: Richard Zhu <hongxing.zhu at nxp.com>; Lucas Stach
> > <l.stach at pengutronix.de>
> > Cc: Kishon Vijay Abraham I <kishon at ti.com>; vkoul at kernel.org; Rob Herring
> > <robh at kernel.org>; galak at kernel.crashing.org; Shawn Guo
> > <shawnguo at kernel.org>; linux-phy at lists.infradead.org; Device Tree Mailing
> > List <devicetree at vger.kernel.org>; Linux ARM Mailing List
> > <linux-arm-kernel at lists.infradead.org>; open list
> > <linux-kernel at vger.kernel.org>; Sascha Hauer <kernel at pengutronix.de>;
> > dl-linux-imx <linux-imx at nxp.com>
> > Subject: Re: [PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie
> > support
> >
> > On Tue, Oct 12, 2021 at 2:06 AM Richard Zhu <hongxing.zhu at nxp.com>
> > wrote:
> > >
> > > refer to the discussion [1] when try to enable i.MX8MM PCIe support,
> > > one standalone PCIe PHY driver should be seperated from i.MX PCIe
> > > driver when enable i.MX8MM PCIe support.
> > >
> > > This patch-set adds the standalone PCIe PHY driver suport[1-5], and
> > > i.MX8MM PCIe support[6-9] to have whole view to review this patch-set.
> > >
> > > The PCIe works on i.MX8MM EVK board based the the blkctrl power driver
> > > [2] and this PHY driver patch-set.
> > >
> > > [1]
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> > >
> > hwork.ozlabs.org%2Fproject%2Flinux-pci%2Fpatch%2F20210510141509.929
> > 120
> > >
> > -3-l.stach%40pengutronix.de%2F&data=04%7C01%7Chongxing.zhu%40
> > nxp.c
> > >
> > om%7C4e3d8ee008d94327f99108d9901634be%7C686ea1d3bc2b4c6fa92cd
> > 99c5c3016
> > >
> > 35%7C0%7C0%7C637699247319711209%7CUnknown%7CTWFpbGZsb3d8ey
> > JWIjoiMC4wLj
> > >
> > AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
> > ;sdata=
> > >
> > Z2TZCpdDUSoqrNB1X%2BXdoYNBe3dBDKUgkA4r%2F0TcdOg%3D&reser
> > ved=0
> > > [2]
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> > >
> > hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202109102026
> > 40
> > > .980366-1-l.stach%40pengutronix.de%2F&data=04%7C01%7Chongxin
> > g.zhu%
> > >
> > 40nxp.com%7C4e3d8ee008d94327f99108d9901634be%7C686ea1d3bc2b4c6
> > fa92cd99
> > >
> > c5c301635%7C0%7C0%7C637699247319711209%7CUnknown%7CTWFpbGZ
> > sb3d8eyJWIjo
> > >
> > iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C10
> > 00&amp
> > > ;sdata=5h%2By%2FcBW%2BjFkyplUuN1nB5%2BAFHuwCUJBqvRh1RiPYMo
> > %3D&rese
> > > rved=0
> > >
> > > Main changes v2 --> v3:
> > > - Regarding Lucas' comments.
> > >  - to have a whole view to review the patches, send out the i.MX8MM PCIe
> > support too.
> > >  - move the PHY related bits manipulations of the GPR/SRC to standalone
> > PHY driver.
> > >  - split the dts changes to SOC and board DT, and use the enum instead of
> > raw value.
> > >  - update the license of the dt-binding header file.
> > >
> > > Changes v1 --> v2:
> > > - Update the license of the dt-binding header file to make the license
> > >   compatible with dts files.
> > > - Fix the dt_binding_check errors.
> > >
> > > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml    |   6 +++
> > > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml |  79
> > +++++++++++++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi                |  53
> > ++++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8mm.dtsi                    |
> > 46 ++++++++++++++++-
> > > drivers/pci/controller/dwc/pci-imx6.c                        |  63
> > ++++++++++++++++++++++-
> > > drivers/phy/freescale/Kconfig                                |   9
> > ++++
> > > drivers/phy/freescale/Makefile                               |   1
> > +
> > > drivers/phy/freescale/phy-fsl-imx8m-pcie.c                   | 218
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > ++++++++++++++++++
> > > include/dt-bindings/phy/phy-imx8-pcie.h                      |  14
> > ++++++
> > > 9 files changed, 486 insertions(+), 3 deletions(-)
> > >
> > > [PATCH v3 1/9] dt-bindings: phy: phy-imx8-pcie: Add binding for the
> > > [PATCH v3 2/9] dt-bindings: phy: add imx8 pcie phy driver support
> > > [PATCH v3 3/9] arm64: dts: imx8mm: add the pcie phy support [PATCH v3
> > > 4/9] arm64: dts: imx8mm-evk: add the pcie phy support [PATCH v3 5/9]
> > > phy: freescale: pcie: initialize the imx8 pcie [PATCH v3 6/9]
> > > dt-bindings: imx6q-pcie: Add PHY phandles and name [PATCH v3 7/9]
> > > arm64: dts: imx8mm: add the pcie support [PATCH v3 8/9] arm64: dts:
> > > imx8mm-evk: add the pcie support on imx8mm [PATCH v3 9/9] PCI: imx:
> > > add the imx8mm pcie support
> >
> > Richard and Lucas,
> >
> > Thanks for your collective work on this series!
> >
> > I have imx8mm-venice boards to test this on both with and without PCIe
> > bridges. I've tested this on top of Shawn's imx/for-next (as blk-ctl has been
> > merged there) and end up hanging waiting for PHY ready timeout.
> [Richard Zhu] Sorry to reply late. I run the tests based on pci/for-next applied the blk-ctl issue by Lucas [2] in commit.
> Can you help to make a re-tests?
> As I know that the blk-ctl is not merged yet.
> Hi Lucas:
> Am I right?
>

Richard,

v5 of blk-ctl is merged into Shawn's for-next tree.

> >
> > [    1.454308] imx6q-pcie 33800000.pcie:       IO
> > 0x001ff80000..0x001ff8ffff -> 0x0
> > [    1.466538] imx6q-pcie 33800000.pcie:      MEM
> > 0x0018000000..0x001fefffff -> 0x0
> > [    1.476344] libphy: fec_enet_mii_bus: probed
> > [    1.602631] phy phy-32f00000.pcie-phy.0: phy init failed --> -110
> > [    1.608775] imx6q-pcie 33800000.pcie: Waiting for PHY ready timeout!
> >
> > I can verify that imx8_pcie_phy_probe returns successfully and the the phy
> > node (imx6_pcie->phy) was found.
> >
> > Here is the dt change I made for the imx8mm-venice-gw71xx-0x board that
> > has no bridge:
> [Richard Zhu] Refer to the changes, the external OSC is used as PCIe REF clock(same to EVK board design), right?

Correct, an ext osc is used like EVK.

I applied v5 blk-ctl and your v3 series on top of pci/next and came up
with the same issue. Do you have a git repo I could try to make sure
I'm not missing anything?

Also, as Lucas has requested some changes do you have a v4 coming soon
that I should wait for to try? I believe this has something to do with
the phy reset where some of his changes were requested.

Best regards,

Tim