[PATCH] ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2

[Alexandre Torgue]

Hi Marek

On 10/28/20 9:46 PM, Marek Vasut wrote:
> On the prototype DHCOM, the LED5 was connected to pin PG2 of the
> STM32MP15xx, however on the production SoM this was changed to pin
> PC6. Update the connection in the DT.
> 
> Fixes: 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
>   arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
> index 3c279ca58ce8..283df559433b 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
> @@ -82,7 +82,7 @@ led {
>   
>   		led-0 {
>   			label = "green:led5";
> -			gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
> +			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
>   			default-state = "off";
>   		};
>   
> 

Applied on stm32-dt-for-v5.10-fixes.

regards
alex