[PATCH] ARM: dts: stm32: Define VIO regulator supply on DHCOM

[Alexandre Torgue]

Hi Marek

On 10/29/20 8:46 PM, Marek Vasut wrote:
> The VIO regulator is supplied by PMIC Buck3, describe this in the DT.
> 
> Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
>   arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> index 6b5899f61142..9caa0dfc7b22 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> @@ -69,6 +69,7 @@ ethernet_vio: vioregulator {
>   		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
>   		regulator-always-on;
>   		regulator-boot-on;
> +		vin-supply = <&vdd>;
>   	};
>   };
>   
> 

Applied on stm32-dt-for-v5.10-fixes.

Thanks
alex