[PATCH v3 01/18] clocksource: sp804: Add support for OX810SE 24bit timer width

[Neil Armstrong]

In order to support the Dual-Timer on the PLX Technology OX810SE SoC,
implement variable counter width, keeping 32bit as default width.
Add new compatible string oxsemi,ox810se-rps-timer in order to select
the 24bit counter width.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/clocksource/timer-sp804.c | 40 ++++++++++++++++++++++++++-------------
 include/clocksource/timer-sp804.h | 11 ++++++-----
 2 files changed, 33 insertions(+), 18 deletions(-)

diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 5f45b9a..bdf3e14 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -80,9 +80,11 @@ void __init sp804_timer_disable(void __iomem *base)
 void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 						     const char *name,
 						     struct clk *clk,
-						     int use_sched_clock)
+						     int use_sched_clock,
+						     unsigned int width)
 {
 	long rate;
+	u32 config = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 
 	if (!clk) {
 		clk = clk_get_sys("sp804", name);
@@ -98,19 +100,21 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 	if (rate < 0)
 		return;
 
+	if (width == 32)
+		config |= TIMER_CTRL_32BIT;
+
 	/* setup timer 0 as free-running clocksource */
 	writel(0, base + TIMER_CTRL);
 	writel(0xffffffff, base + TIMER_LOAD);
 	writel(0xffffffff, base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		base + TIMER_CTRL);
+	writel(config, base + TIMER_CTRL);
 
 	clocksource_mmio_init(base + TIMER_VALUE, name,
-		rate, 200, 32, clocksource_mmio_readl_down);
+		rate, 200, width, clocksource_mmio_readl_down);
 
 	if (use_sched_clock) {
 		sched_clock_base = base;
-		sched_clock_register(sp804_read, 32, rate);
+		sched_clock_register(sp804_read, width, rate);
 	}
 }
 
@@ -186,7 +190,9 @@ static struct irqaction sp804_timer_irq = {
 	.dev_id		= &sp804_clockevent,
 };
 
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
+void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq,
+				     struct clk *clk, const char *name,
+				     unsigned int width)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
 	long rate;
@@ -212,7 +218,7 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
 	writel(0, base + TIMER_CTRL);
 
 	setup_irq(irq, &sp804_timer_irq);
-	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
+	clockevents_config_and_register(evt, rate, 0xf, GENMASK(width-1, 0));
 }
 
 static void __init sp804_of_init(struct device_node *np)
@@ -223,6 +229,7 @@ static void __init sp804_of_init(struct device_node *np)
 	u32 irq_num = 0;
 	struct clk *clk1, *clk2;
 	const char *name = of_get_property(np, "compatible", NULL);
+	u32 width = 32;
 
 	base = of_iomap(np, 0);
 	if (WARN_ON(!base))
@@ -254,14 +261,19 @@ static void __init sp804_of_init(struct device_node *np)
 	if (irq <= 0)
 		goto err;
 
+	if (of_device_is_compatible(np, "oxsemi,ox810se-rps-timer"))
+		width = 24;
+
 	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
 	if (irq_num == 2) {
-		__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
-		__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+		__sp804_clockevents_init(base + TIMER_2_BASE, irq,
+					 clk2, name, width);
+		__sp804_clocksource_and_sched_clock_init(base, name,
+							 clk1, 1, width);
 	} else {
-		__sp804_clockevents_init(base, irq, clk1 , name);
+		__sp804_clockevents_init(base, irq, clk1, name, width);
 		__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
-							 name, clk2, 1);
+							 name, clk2, 1, width);
 	}
 	initialized = true;
 
@@ -270,6 +282,7 @@ err:
 	iounmap(base);
 }
 CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+CLOCKSOURCE_OF_DECLARE(ox810se, "oxsemi,ox810se-rps-timer", sp804_of_init);
 
 static void __init integrator_cp_of_init(struct device_node *np)
 {
@@ -293,13 +306,14 @@ static void __init integrator_cp_of_init(struct device_node *np)
 		goto err;
 
 	if (!init_count)
-		__sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
+		__sp804_clocksource_and_sched_clock_init(base, name,
+							 clk, 0, 32);
 	else {
 		irq = irq_of_parse_and_map(np, 0);
 		if (irq <= 0)
 			goto err;
 
-		__sp804_clockevents_init(base, irq, clk, name);
+		__sp804_clockevents_init(base, irq, clk, name, 32);
 	}
 
 	init_count++;
diff --git a/include/clocksource/timer-sp804.h b/include/clocksource/timer-sp804.h
index 1f8a1ca..893d730 100644
--- a/include/clocksource/timer-sp804.h
+++ b/include/clocksource/timer-sp804.h
@@ -4,25 +4,26 @@
 struct clk;
 
 void __sp804_clocksource_and_sched_clock_init(void __iomem *,
-					      const char *, struct clk *, int);
+					      const char *, struct clk *,
+					      int, unsigned int);
 void __sp804_clockevents_init(void __iomem *, unsigned int,
-			      struct clk *, const char *);
+			      struct clk *, const char *, unsigned int);
 void sp804_timer_disable(void __iomem *);
 
 static inline void sp804_clocksource_init(void __iomem *base, const char *name)
 {
-	__sp804_clocksource_and_sched_clock_init(base, name, NULL, 0);
+	__sp804_clocksource_and_sched_clock_init(base, name, NULL, 0, 32);
 }
 
 static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
 							  const char *name)
 {
-	__sp804_clocksource_and_sched_clock_init(base, name, NULL, 1);
+	__sp804_clocksource_and_sched_clock_init(base, name, NULL, 1, 32);
 }
 
 static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name)
 {
-	__sp804_clockevents_init(base, irq, NULL, name);
+	__sp804_clockevents_init(base, irq, NULL, name, 32);
 
 }
 #endif
-- 
1.9.1