[PATCH v3 01/18] clocksource: sp804: Add support for OX810SE 24bit timer width
Daniel Lezcano
daniel.lezcano at linaro.org
Tue Mar 29 07:37:16 PDT 2016
On 03/24/2016 05:49 PM, Neil Armstrong wrote:
> In order to support the Dual-Timer on the PLX Technology OX810SE SoC,
> implement variable counter width, keeping 32bit as default width.
> Add new compatible string oxsemi,ox810se-rps-timer in order to select
> the 24bit counter width.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Hi Neil,
could you encapsulate the timer properties into a structure:
struct timer_sp804 {
struct clock_event_device sp804_clockevent;
void __iomem *base;
unsigned int rate;
unsigned int width;
}
and pass this structure around instead of an ugly '32' constant ?
Thanks !
-- Daniel
> ---
> drivers/clocksource/timer-sp804.c | 40 ++++++++++++++++++++++++++-------------
> include/clocksource/timer-sp804.h | 11 ++++++-----
> 2 files changed, 33 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
> index 5f45b9a..bdf3e14 100644
> --- a/drivers/clocksource/timer-sp804.c
> +++ b/drivers/clocksource/timer-sp804.c
> @@ -80,9 +80,11 @@ void __init sp804_timer_disable(void __iomem *base)
> void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
> const char *name,
> struct clk *clk,
> - int use_sched_clock)
> + int use_sched_clock,
> + unsigned int width)
> {
> long rate;
> + u32 config = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
>
> if (!clk) {
> clk = clk_get_sys("sp804", name);
> @@ -98,19 +100,21 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
> if (rate < 0)
> return;
>
> + if (width == 32)
> + config |= TIMER_CTRL_32BIT;
> +
> /* setup timer 0 as free-running clocksource */
> writel(0, base + TIMER_CTRL);
> writel(0xffffffff, base + TIMER_LOAD);
> writel(0xffffffff, base + TIMER_VALUE);
> - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
> - base + TIMER_CTRL);
> + writel(config, base + TIMER_CTRL);
>
> clocksource_mmio_init(base + TIMER_VALUE, name,
> - rate, 200, 32, clocksource_mmio_readl_down);
> + rate, 200, width, clocksource_mmio_readl_down);
>
> if (use_sched_clock) {
> sched_clock_base = base;
> - sched_clock_register(sp804_read, 32, rate);
> + sched_clock_register(sp804_read, width, rate);
> }
> }
>
> @@ -186,7 +190,9 @@ static struct irqaction sp804_timer_irq = {
> .dev_id = &sp804_clockevent,
> };
>
> -void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
> +void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq,
> + struct clk *clk, const char *name,
> + unsigned int width)
> {
> struct clock_event_device *evt = &sp804_clockevent;
> long rate;
> @@ -212,7 +218,7 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
> writel(0, base + TIMER_CTRL);
>
> setup_irq(irq, &sp804_timer_irq);
> - clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
> + clockevents_config_and_register(evt, rate, 0xf, GENMASK(width-1, 0));
> }
>
> static void __init sp804_of_init(struct device_node *np)
> @@ -223,6 +229,7 @@ static void __init sp804_of_init(struct device_node *np)
> u32 irq_num = 0;
> struct clk *clk1, *clk2;
> const char *name = of_get_property(np, "compatible", NULL);
> + u32 width = 32;
>
> base = of_iomap(np, 0);
> if (WARN_ON(!base))
> @@ -254,14 +261,19 @@ static void __init sp804_of_init(struct device_node *np)
> if (irq <= 0)
> goto err;
>
> + if (of_device_is_compatible(np, "oxsemi,ox810se-rps-timer"))
> + width = 24;
> +
> of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
> if (irq_num == 2) {
> - __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
> - __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
> + __sp804_clockevents_init(base + TIMER_2_BASE, irq,
> + clk2, name, width);
> + __sp804_clocksource_and_sched_clock_init(base, name,
> + clk1, 1, width);
> } else {
> - __sp804_clockevents_init(base, irq, clk1 , name);
> + __sp804_clockevents_init(base, irq, clk1, name, width);
> __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
> - name, clk2, 1);
> + name, clk2, 1, width);
> }
> initialized = true;
>
> @@ -270,6 +282,7 @@ err:
> iounmap(base);
> }
> CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
> +CLOCKSOURCE_OF_DECLARE(ox810se, "oxsemi,ox810se-rps-timer", sp804_of_init);
>
> static void __init integrator_cp_of_init(struct device_node *np)
> {
> @@ -293,13 +306,14 @@ static void __init integrator_cp_of_init(struct device_node *np)
> goto err;
>
> if (!init_count)
> - __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
> + __sp804_clocksource_and_sched_clock_init(base, name,
> + clk, 0, 32);
> else {
> irq = irq_of_parse_and_map(np, 0);
> if (irq <= 0)
> goto err;
>
> - __sp804_clockevents_init(base, irq, clk, name);
> + __sp804_clockevents_init(base, irq, clk, name, 32);
> }
>
> init_count++;
> diff --git a/include/clocksource/timer-sp804.h b/include/clocksource/timer-sp804.h
> index 1f8a1ca..893d730 100644
> --- a/include/clocksource/timer-sp804.h
> +++ b/include/clocksource/timer-sp804.h
> @@ -4,25 +4,26 @@
> struct clk;
>
> void __sp804_clocksource_and_sched_clock_init(void __iomem *,
> - const char *, struct clk *, int);
> + const char *, struct clk *,
> + int, unsigned int);
> void __sp804_clockevents_init(void __iomem *, unsigned int,
> - struct clk *, const char *);
> + struct clk *, const char *, unsigned int);
> void sp804_timer_disable(void __iomem *);
>
> static inline void sp804_clocksource_init(void __iomem *base, const char *name)
> {
> - __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0);
> + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0, 32);
> }
>
> static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
> const char *name)
> {
> - __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1);
> + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1, 32);
> }
>
> static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name)
> {
> - __sp804_clockevents_init(base, irq, NULL, name);
> + __sp804_clockevents_init(base, irq, NULL, name, 32);
>
> }
> #endif
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
More information about the linux-arm-kernel
mailing list