[PATCH v3 00/18] Add Initial support for PLX Technology OX810SE
Neil Armstrong
narmstrong at baylibre.com
Thu Mar 24 09:49:57 PDT 2016
This serie adds initial support (IRQ, Timer, GPIO, Reset, Serial, Clocks) for
the PLX Technology OX810SE used in the well-known Western Digital My Book
World Edition Network Attached Storage device.
Extended support for SATA, DMA and Ethernet will come in further patches.
Upstream support for following devices like the OX820SE is welcome !
v3 changes :
- use SoC specific compatible for interrupt controller
- use SoC specific compatible for dual timers, cleanup up width management
- full rewrite of pinctrl and gpio based on the pic32 code
- empty arm/arm/mach-oxnas/Makefile removal
- dtsi update with timer&irq compatible and pinctrl rewrite
v2 changes : http://lkml.kernel.org/r/1457519060-6038-1-git-send-email-narmstrong@baylibre.com
- switch all compatible string to oxsemi,ox820se
- add oxsemi to prefixes
- switch to versatile-fpga interrupt controller with new compatible
- switch to sp804 timer with new timer width property
- cleanup of mach-oxnas (removal of generic oxnas.c)
- cleanup of standard clock to a platform driver
v1 : http://lkml.kernel.org/r/1457005210-18485-1-git-send-email-narmstrong@baylibre.com
Neil Armstrong (18):
clocksource: sp804: Add support for OX810SE 24bit timer width
dt-bindings: timer: sp804: add new compatible for OX810SE SoC
irqchip: versatile-fpga: add new compatible for OX810SE SoC
dt-bindings: irq: arm,versatile-fpga: add compatible string for
OX810SE SoC
dt-bindings: vendor-prefixes: Add PLX Technology
dt-bindings: Add Oxford Semiconductors to vendor prefixes
reset: Add PLX Technology Reset Controller driver
dt-bindings: Add PLX Technology Reset Controller bindings
clk: Add PLX Technology OXNAS Standard Clocks
dt-bindings: Add PLX Technology OXNAS Standard Clocks bindings
pinctrl: Add PLX Technology OXNAS pinctrl and gpio driver
dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings
arm: Add new mach-oxnas
arm: Add build support for mach-oxnas
arm: boot: dts: Add PLX Technology OX810SE dtsi
dt-bindings: Add OXNAS bindings
dt-bindings: Add Western Digital to vendor prefixes
arm: boot: dts: Add Western Digital My Book World Edition device tree
Documentation/devicetree/bindings/arm/oxnas.txt | 9 +
.../devicetree/bindings/clock/plxtech,stdclk.txt | 35 +
.../devicetree/bindings/gpio/gpio_oxnas.txt | 47 ++
.../arm,versatile-fpga-irq.txt | 2 +-
.../bindings/pinctrl/plxtech,pinctrl.txt | 57 ++
.../devicetree/bindings/reset/plxtech,reset.txt | 58 ++
.../devicetree/bindings/timer/arm,sp804.txt | 2 +-
.../devicetree/bindings/vendor-prefixes.txt | 5 +-
arch/arm/Kconfig | 2 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/ox810se.dtsi | 336 +++++++++
arch/arm/boot/dts/wd-mbwe.dts | 112 +++
arch/arm/mach-oxnas/Kconfig | 25 +
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-oxnas.c | 202 +++++
drivers/clocksource/timer-sp804.c | 40 +-
drivers/irqchip/irq-versatile-fpga.c | 1 +
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-oxnas.c | 837 +++++++++++++++++++++
drivers/reset/Kconfig | 3 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-oxnas.c | 136 ++++
include/clocksource/timer-sp804.h | 11 +-
25 files changed, 1921 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/oxnas.txt
create mode 100644 Documentation/devicetree/bindings/clock/plxtech,stdclk.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/reset/plxtech,reset.txt
create mode 100644 arch/arm/boot/dts/ox810se.dtsi
create mode 100644 arch/arm/boot/dts/wd-mbwe.dts
create mode 100644 arch/arm/mach-oxnas/Kconfig
create mode 100644 drivers/clk/clk-oxnas.c
create mode 100644 drivers/pinctrl/pinctrl-oxnas.c
create mode 100644 drivers/reset/reset-oxnas.c
--
1.9.1
More information about the linux-arm-kernel
mailing list