[PATCH 0/3] 96boards: add thermal senor support to hikey board
kong.kongxinwei at hisilicon.com
Thu Mar 19 20:10:16 PDT 2015
hi Mark Rutland:
在 2015/3/19 21:59, Mark Rutland 写道:
> On Thu, Mar 19, 2015 at 07:57:26AM +0000, kongxinwei wrote:
>> The Linaro connect introduce 96boards series in Hong Kong,The HiKey board
>> is the first board to be certified 96Boards Consumer Edition compatible.
>> This board is based on the HiSilicon SoC. you can get more information
>> from https://www.96boards.org.
>> The hisilicon SoC contains thermal module, this thermal module has 4 sensors,
>> - sensor 0: local sensor;
>> - sensor 1: remote sensor for ACPU cluster 1;
>> - sensor 2: remote sensor for ACPU cluster 2;
>> - sensor 3: remote sensor for GPU;
>> It can obtain this device temperature by operating this hardware. The new
>> sensor driver satisfies thermal framework and to realize the ACPU ,GPU and
>> so on to cool function.
>> kongxinwei (3):
>> thermal: hisilicon: add new hisilicon thermal sensor driver
>> dts: hi6220: enable thermal sensor for hisilicon SoC
>> dt-bindings: Document the hi6220 thermal sensor bindings
>> .../bindings/thermal/hisilicon-thermal.txt | 51 ++
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 153 ++++++
>> drivers/thermal/Kconfig | 8 +
>> drivers/thermal/Makefile | 1 +
>> drivers/thermal/hisi_thermal.c | 531 +++++++++++++++++++++
> Mainline does not have a hi6220 dtsi.
> Which tree is this against?
> What are your dependencies?
Hikey board code are being upstreamed by our team.If hi6220 dtsi be accepted, this patch is ok.
More information about the linux-arm-kernel