[PATCH 0/3] 96boards: add thermal senor support to hikey board

[Leo Yan]

On Fri, Mar 20, 2015 at 11:10:16AM +0800, kongxinwei wrote:
> hi Mark Rutland:
> 
> 在 2015/3/19 21:59, Mark Rutland 写道:
> > On Thu, Mar 19, 2015 at 07:57:26AM +0000, kongxinwei wrote:
> >> The Linaro connect introduce 96boards series in Hong Kong,The HiKey board
> >> is the first board to be certified 96Boards Consumer Edition compatible.
> >> This board is based on the HiSilicon SoC. you can get more information
> >> from https://www.96boards.org.
> >>
> >> The hisilicon SoC contains thermal module, this thermal module has 4 sensors,
> >>
> >> 	- sensor 0: local sensor;
> >> 	- sensor 1: remote sensor for ACPU cluster 1;
> >> 	- sensor 2: remote sensor for ACPU cluster 2;
> >> 	- sensor 3: remote sensor for GPU;
> >>
> >> It can obtain this device temperature by operating this hardware. The new
> >> sensor driver satisfies thermal framework and to realize the ACPU ,GPU and
> >> so on to cool function.
> >>
> >> kongxinwei (3):
> >>   thermal: hisilicon: add new hisilicon thermal sensor driver
> >>   dts: hi6220: enable thermal sensor for hisilicon SoC
> >>   dt-bindings: Document the hi6220 thermal sensor bindings
> >>
> >>  .../bindings/thermal/hisilicon-thermal.txt         |  51 ++
> >>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi          | 153 ++++++
> >>  drivers/thermal/Kconfig                            |   8 +
> >>  drivers/thermal/Makefile                           |   1 +
> >>  drivers/thermal/hisi_thermal.c                     | 531 +++++++++++++++++++++
> > 
> > Mainline does not have a hi6220 dtsi.
> > 
> > Which tree is this against?
> > 
> > What are your dependencies?
> > 
> > Mark.
> > 
> Hikey board code are being upstreamed by our team.If hi6220 dtsi be accepted, this patch is ok.

Xinwei, u could resend this patch after hi6220 dtsi related patches has
been merged. Suggest this patchset are only for thermal driver.

Thanks,
Leo Yan