[PATCH 0/3] 96boards: add thermal senor support to hikey board

[Mark Rutland]

On Thu, Mar 19, 2015 at 07:57:26AM +0000, kongxinwei wrote:
> The Linaro connect introduce 96boards series in Hong Kong,The HiKey board
> is the first board to be certified 96Boards Consumer Edition compatible.
> This board is based on the HiSilicon SoC. you can get more information
> from https://www.96boards.org.
> 
> The hisilicon SoC contains thermal module, this thermal module has 4 sensors,
> 
> 	- sensor 0: local sensor;
> 	- sensor 1: remote sensor for ACPU cluster 1;
> 	- sensor 2: remote sensor for ACPU cluster 2;
> 	- sensor 3: remote sensor for GPU;
> 
> It can obtain this device temperature by operating this hardware. The new
> sensor driver satisfies thermal framework and to realize the ACPU ,GPU and
> so on to cool function.
> 
> kongxinwei (3):
>   thermal: hisilicon: add new hisilicon thermal sensor driver
>   dts: hi6220: enable thermal sensor for hisilicon SoC
>   dt-bindings: Document the hi6220 thermal sensor bindings
> 
>  .../bindings/thermal/hisilicon-thermal.txt         |  51 ++
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi          | 153 ++++++
>  drivers/thermal/Kconfig                            |   8 +
>  drivers/thermal/Makefile                           |   1 +
>  drivers/thermal/hisi_thermal.c                     | 531 +++++++++++++++++++++

Mainline does not have a hi6220 dtsi.

Which tree is this against?

What are your dependencies?

Mark.