[PATCH v2 7/8] ARM: sun5i: enable DMA on SPI
Chen-Yu Tsai
wens at csie.org
Mon Jul 7 00:33:35 PDT 2014
On Sun, Jul 6, 2014 at 12:05 PM, Emilio López <emilio at elopez.com.ar> wrote:
> All of our SPI controllers support DMA transfers, so let's add the
> properties here so they can be used when it's best to do so.
>
> Signed-off-by: Emilio López <emilio at elopez.com.ar>
Numbers are good.
Reviewed-by: Chen-Yu Tsai <wens at csie.org>
> ---
> arch/arm/boot/dts/sun5i-a10s.dtsi | 6 ++++++
> arch/arm/boot/dts/sun5i-a13.dtsi | 6 ++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
> index 3708817..12f26f3 100644
> --- a/arch/arm/boot/dts/sun5i-a10s.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
> @@ -314,6 +314,8 @@
> interrupts = <10>;
> clocks = <&ahb_gates 20>, <&spi0_clk>;
> clock-names = "ahb", "mod";
> + dmas = <&dma 1 27>, <&dma 1 26>;
> + dma-names = "rx", "tx";
> status = "disabled";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -325,6 +327,8 @@
> interrupts = <11>;
> clocks = <&ahb_gates 21>, <&spi1_clk>;
> clock-names = "ahb", "mod";
> + dmas = <&dma 1 9>, <&dma 1 8>;
> + dma-names = "rx", "tx";
> status = "disabled";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -411,6 +415,8 @@
> interrupts = <12>;
> clocks = <&ahb_gates 22>, <&spi2_clk>;
> clock-names = "ahb", "mod";
> + dmas = <&dma 1 29>, <&dma 1 28>;
> + dma-names = "rx", "tx";
> status = "disabled";
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
> index 1f1adf2..4bbf455 100644
> --- a/arch/arm/boot/dts/sun5i-a13.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
> @@ -312,6 +312,8 @@
> interrupts = <10>;
> clocks = <&ahb_gates 20>, <&spi0_clk>;
> clock-names = "ahb", "mod";
> + dmas = <&dma 1 27>, <&dma 1 26>;
> + dma-names = "rx", "tx";
> status = "disabled";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -323,6 +325,8 @@
> interrupts = <11>;
> clocks = <&ahb_gates 21>, <&spi1_clk>;
> clock-names = "ahb", "mod";
> + dmas = <&dma 1 9>, <&dma 1 8>;
> + dma-names = "rx", "tx";
> status = "disabled";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -384,6 +388,8 @@
> interrupts = <12>;
> clocks = <&ahb_gates 22>, <&spi2_clk>;
> clock-names = "ahb", "mod";
> + dmas = <&dma 1 29>, <&dma 1 28>;
> + dma-names = "rx", "tx";
> status = "disabled";
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 2.0.1
More information about the linux-arm-kernel
mailing list