[PATCH v2 7/8] ARM: sun5i: enable DMA on SPI

Emilio López emilio at elopez.com.ar
Sat Jul 5 21:05:14 PDT 2014


All of our SPI controllers support DMA transfers, so let's add the
properties here so they can be used when it's best to do so.

Signed-off-by: Emilio López <emilio at elopez.com.ar>
---
 arch/arm/boot/dts/sun5i-a10s.dtsi | 6 ++++++
 arch/arm/boot/dts/sun5i-a13.dtsi  | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 3708817..12f26f3 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -314,6 +314,8 @@
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 27>, <&dma 1 26>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -325,6 +327,8 @@
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 9>, <&dma 1 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -411,6 +415,8 @@
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 29>, <&dma 1 28>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 1f1adf2..4bbf455 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -312,6 +312,8 @@
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 27>, <&dma 1 26>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -323,6 +325,8 @@
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 9>, <&dma 1 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -384,6 +388,8 @@
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 29>, <&dma 1 28>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.0.1



More information about the linux-arm-kernel mailing list