[PATCH v2 8/8] ARM: sun7i: enable DMA on SPI

[Emilio López]

All of our SPI controllers support DMA transfers, so let's add the
properties here so they can be used when it's best to do so.

Signed-off-by: Emilio López <emilio at elopez.com.ar>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8cd3534..804dc01 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -437,6 +437,8 @@
 			interrupts = <0 10 4>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 27>, <&dma 1 26>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -448,6 +450,8 @@
 			interrupts = <0 11 4>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 9>, <&dma 1 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,6 +547,8 @@
 			interrupts = <0 12 4>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 29>, <&dma 1 28>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -582,6 +588,8 @@
 			interrupts = <0 50 4>;
 			clocks = <&ahb_gates 23>, <&spi3_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 31>, <&dma 1 30>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.0.1