[PATCH v2 3/7] usb: phy: mxs: Add VF610 USB PHY support

[Peter Chen]

On Mon, Jul 28, 2014 at 04:57:29PM +0200, Stefan Agner wrote:
> This adds support for the USB PHY in Vybrid VF610. We assume that
> the disconnection without VBUS is also needed for Vybrid.
> 
> Tests showed, without MXS_PHY_NEED_IP_FIX, enumeration of devices
> behind a USB Hub fails with errors:
> 
> [  215.163507] usb usb1-port1: cannot reset (err = -32)
> [  215.170498] usb usb1-port1: cannot reset (err = -32)
> [  215.185120] usb usb1-port1: cannot reset (err = -32)
> [  215.191345] usb usb1-port1: cannot reset (err = -32)
> [  215.202487] usb usb1-port1: cannot reset (err = -32)
> [  215.207718] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
> [  215.219317] usb usb1-port1: unable to enumerate USB device
> 
> Hence we also enable the MXS_PHY_NEED_IP_FIX flag.
> 
> Signed-off-by: Stefan Agner <stefan at agner.ch>
> ---
>  Documentation/devicetree/bindings/usb/mxs-phy.txt | 1 +
>  drivers/usb/phy/phy-mxs-usb.c                     | 6 ++++++
>  2 files changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> index cef181a..fe3eed8 100644
> --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> @@ -5,6 +5,7 @@ Required properties:
>  	* "fsl,imx23-usbphy" for imx23 and imx28
>  	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
>  	* "fsl,imx6sl-usbphy" for imx6sl
> +	* "fsl,vf610-usbphy" for Vybrid vf610
>    "fsl,imx23-usbphy" is still a fallback for other strings
>  - reg: Should contain registers location and length
>  - interrupts: Should contain phy interrupt
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index c42bdf0..8c2f23b 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -125,10 +125,16 @@ static const struct mxs_phy_data imx6sl_phy_data = {
>  		MXS_PHY_NEED_IP_FIX,
>  };
>  
> +static const struct mxs_phy_data vf610_phy_data = {
> +	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
> +		MXS_PHY_NEED_IP_FIX,
> +};
> +
>  static const struct of_device_id mxs_phy_dt_ids[] = {
>  	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
>  	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
>  	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
> +	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> -- 
> 2.0.2
> 

Acked-by: Peter Chen <peter.chen at freescale.com>

-- 
Best Regards,
Peter Chen