[PATCH v2 3/7] usb: phy: mxs: Add VF610 USB PHY support

[Stefan Agner]

Am 2014-08-02 02:36, schrieb Peter Chen:
> On Mon, Jul 28, 2014 at 04:57:29PM +0200, Stefan Agner wrote:
>> This adds support for the USB PHY in Vybrid VF610. We assume that
>> the disconnection without VBUS is also needed for Vybrid.
>>
>> Tests showed, without MXS_PHY_NEED_IP_FIX, enumeration of devices
>> behind a USB Hub fails with errors:
>>
>> [  215.163507] usb usb1-port1: cannot reset (err = -32)
>> [  215.170498] usb usb1-port1: cannot reset (err = -32)
>> [  215.185120] usb usb1-port1: cannot reset (err = -32)
>> [  215.191345] usb usb1-port1: cannot reset (err = -32)
>> [  215.202487] usb usb1-port1: cannot reset (err = -32)
>> [  215.207718] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
>> [  215.219317] usb usb1-port1: unable to enumerate USB device
>>
>> Hence we also enable the MXS_PHY_NEED_IP_FIX flag.
>>
>> Signed-off-by: Stefan Agner <stefan at agner.ch>
>> ---
>>  Documentation/devicetree/bindings/usb/mxs-phy.txt | 1 +
>>  drivers/usb/phy/phy-mxs-usb.c                     | 6 ++++++
>>  2 files changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
>> index cef181a..fe3eed8 100644
>> --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
>> +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
>> @@ -5,6 +5,7 @@ Required properties:
>>  	* "fsl,imx23-usbphy" for imx23 and imx28
>>  	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
>>  	* "fsl,imx6sl-usbphy" for imx6sl
>> +	* "fsl,vf610-usbphy" for Vybrid vf610
>>    "fsl,imx23-usbphy" is still a fallback for other strings
>>  - reg: Should contain registers location and length
>>  - interrupts: Should contain phy interrupt
>> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
>> index c42bdf0..8c2f23b 100644
>> --- a/drivers/usb/phy/phy-mxs-usb.c
>> +++ b/drivers/usb/phy/phy-mxs-usb.c
>> @@ -125,10 +125,16 @@ static const struct mxs_phy_data imx6sl_phy_data = {
>>  		MXS_PHY_NEED_IP_FIX,
>>  };
>>
>> +static const struct mxs_phy_data vf610_phy_data = {
>> +	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
>> +		MXS_PHY_NEED_IP_FIX,
>> +};
>> +
>>  static const struct of_device_id mxs_phy_dt_ids[] = {
>>  	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
>>  	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
>>  	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
>> +	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
>>  	{ /* sentinel */ }
>>  };
>>  MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
>> --
>> 2.0.2
>>
> 
> Acked-by: Peter Chen <peter.chen at freescale.com>

Thanks Peter.

Just realized that I missed USB PHY maintainer Felipe Balbi, sorry!
Felipe, I guess this goes through your tree?

--
Stefan