[PATCH RESEND v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver

Jerome Brunet jbrunet at baylibre.com
Wed Mar 2 00:42:06 PST 2022


On Wed 02 Mar 2022 at 13:19, Liang.Yang <liang.yang at amlogic.com> wrote:

> Hi Jerome,
>
> On 2022/2/28 19:36, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> 
>> On Thu 17 Feb 2022 at 14:33, Liang Yang <liang.yang at amlogic.com> wrote:
>> 
>>> convert txt to yaml and refine the meson NFC clock document.
>>>
>>> Signed-off-by: Liang Yang <liang.yang at amlogic.com>
>>> ---
>>>   .../bindings/mtd/amlogic,meson-nand.txt       | 60 ----------------
>>>   .../bindings/mtd/amlogic,meson-nand.yaml      | 70 +++++++++++++++++++
>>>   2 files changed, 70 insertions(+), 60 deletions(-)
>>>   delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>>   create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>> deleted file mode 100644
>>> index 5794ab1147c1..000000000000
>>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>> +++ /dev/null
>>> @@ -1,60 +0,0 @@
>>> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>>> -
>>> -This file documents the properties in addition to those available in
>>> -the MTD NAND bindings.
>>> -
>>> -Required properties:
>>> -- compatible : contains one of:
>>> -  - "amlogic,meson-gxl-nfc"
>>> -  - "amlogic,meson-axg-nfc"
>>> -- clocks     :
>>> -	A list of phandle + clock-specifier pairs for the clocks listed
>>> -	in clock-names.
>>> -
>>> -- clock-names: Should contain the following:
>>> -	"core" - NFC module gate clock
>>> -	"device" - device clock from eMMC sub clock controller
>>> -	"rx" - rx clock phase
>>> -	"tx" - tx clock phase
>>> -
>>> -- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
>>> -				controller port C
>>> -
>>> -Optional children nodes:
>>> -Children nodes represent the available nand chips.
>>> -
>>> -Other properties:
>>> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
>>> -
>>> -Example demonstrate on AXG SoC:
>>> -
>>> -	sd_emmc_c_clkc: mmc at 7000 {
>>> -		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
>>> -		reg = <0x0 0x7000 0x0 0x800>;
>>> -	};
>>> -
>>> -	nand-controller at 7800 {
>>> -		compatible = "amlogic,meson-axg-nfc";
>>> -		reg = <0x0 0x7800 0x0 0x100>;
>>> -		#address-cells = <1>;
>>> -		#size-cells = <0>;
>>> -		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>>> -
>>> -		clocks = <&clkc CLKID_SD_EMMC_C>,
>>> -			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
>>> -			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
>>> -			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
>>> -		clock-names = "core", "device", "rx", "tx";
>>> -		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
>>> -
>>> -		pinctrl-names = "default";
>>> -		pinctrl-0 = <&nand_pins>;
>>> -
>>> -		nand at 0 {
>>> -			reg = <0>;
>>> -			#address-cells = <1>;
>>> -			#size-cells = <1>;
>>> -
>>> -			nand-on-flash-bbt;
>>> -		};
>>> -	};
>>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>> new file mode 100644
>>> index 000000000000..671f0a8fdc7c
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>> @@ -0,0 +1,70 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>>> +
>>> +maintainers:
>>> +  - liang.yang at amlogic.com
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - "amlogic,meson-gxl-nfc"
>>> +      - "amlogic,meson-axg-nfc"
>>> +
>>> +  reg:
>>> +    maxItems: 2
>>> +
>>> +  interrupts:
>>> +    maxItems: 1
>>> +
>>> +  clocks:
>>> +    maxItems: 2
>>> +
>>> +  clock-names:
>>> +    items:
>>> +      - const: "core", "device"
>>> +
>>> +  "#clock-cells":
>>> +    const: 1
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +  - interrupts
>>> +  - clocks
>>> +  - clock-names
>>> +  - "#clock-cells"
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    nand-controller at 7800 {
>>> +	compatible = "amlogic,meson-axg-nfc";
>>> +	reg = <0x0 0x7800 0x0 0x100>,
>>> +	      <0x0 0x7000 0x0 0x1>;
>> Please name the register ressources instead of relying on the order
> ok
>> Also, use the actual size of region, not the size you are using in the
>> driver. AFAIK, the size of the 2nd region is not 0x1
> yes, it should be 0x4 here, i will fix it.
> we only need to use a 32bits SDEMMC_CLOCK register.
> thanks.

No, it is not the point.
What register you need in the driver is not relevant.
What is relevant is the actual size of the memory region - so it not 0x1
or 0x4 ... more likely 0x800 from what I see in the AXG dts.

>> 
>>> +	#address-cells = <1>;
>>> +	#size-cells = <0>;
>>> +	interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>>> +
>>> +	clocks = <&clkc CLKID_SD_EMMC_C>,
>>> +		<&clkc CLKID_FCLK_DIV2>;
>>> +	clock-names = "core", "device";
>>> +
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&nand_pins>;
>>> +
>>> +	nand at 0 {
>>> +		reg = <0>;
>>> +		#address-cells = <1>;
>>> +		#size-cells = <1>;
>>> +
>>> +		nand-on-flash-bbt;
>>> +	};
>>> +     };
>>> +
>>> +...
>>> \ No newline at end of file
>> .




More information about the linux-amlogic mailing list