[PATCH RESEND v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver

[Liang.Yang]

Hi Jerome,

On 2022/2/28 19:36, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
> 
> 
> On Thu 17 Feb 2022 at 14:33, Liang Yang <liang.yang at amlogic.com> wrote:
> 
>> convert txt to yaml and refine the meson NFC clock document.
>>
>> Signed-off-by: Liang Yang <liang.yang at amlogic.com>
>> ---
>>   .../bindings/mtd/amlogic,meson-nand.txt       | 60 ----------------
>>   .../bindings/mtd/amlogic,meson-nand.yaml      | 70 +++++++++++++++++++
>>   2 files changed, 70 insertions(+), 60 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>   create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> deleted file mode 100644
>> index 5794ab1147c1..000000000000
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> +++ /dev/null
>> @@ -1,60 +0,0 @@
>> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> -
>> -This file documents the properties in addition to those available in
>> -the MTD NAND bindings.
>> -
>> -Required properties:
>> -- compatible : contains one of:
>> -  - "amlogic,meson-gxl-nfc"
>> -  - "amlogic,meson-axg-nfc"
>> -- clocks     :
>> -	A list of phandle + clock-specifier pairs for the clocks listed
>> -	in clock-names.
>> -
>> -- clock-names: Should contain the following:
>> -	"core" - NFC module gate clock
>> -	"device" - device clock from eMMC sub clock controller
>> -	"rx" - rx clock phase
>> -	"tx" - tx clock phase
>> -
>> -- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
>> -				controller port C
>> -
>> -Optional children nodes:
>> -Children nodes represent the available nand chips.
>> -
>> -Other properties:
>> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
>> -
>> -Example demonstrate on AXG SoC:
>> -
>> -	sd_emmc_c_clkc: mmc at 7000 {
>> -		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
>> -		reg = <0x0 0x7000 0x0 0x800>;
>> -	};
>> -
>> -	nand-controller at 7800 {
>> -		compatible = "amlogic,meson-axg-nfc";
>> -		reg = <0x0 0x7800 0x0 0x100>;
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> -
>> -		clocks = <&clkc CLKID_SD_EMMC_C>,
>> -			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
>> -			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
>> -			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
>> -		clock-names = "core", "device", "rx", "tx";
>> -		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
>> -
>> -		pinctrl-names = "default";
>> -		pinctrl-0 = <&nand_pins>;
>> -
>> -		nand at 0 {
>> -			reg = <0>;
>> -			#address-cells = <1>;
>> -			#size-cells = <1>;
>> -
>> -			nand-on-flash-bbt;
>> -		};
>> -	};
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> new file mode 100644
>> index 000000000000..671f0a8fdc7c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -0,0 +1,70 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> +
>> +maintainers:
>> +  - liang.yang at amlogic.com
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - "amlogic,meson-gxl-nfc"
>> +      - "amlogic,meson-axg-nfc"
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    items:
>> +      - const: "core", "device"
>> +
>> +  "#clock-cells":
>> +    const: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - clocks
>> +  - clock-names
>> +  - "#clock-cells"
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    nand-controller at 7800 {
>> +	compatible = "amlogic,meson-axg-nfc";
>> +	reg = <0x0 0x7800 0x0 0x100>,
>> +	      <0x0 0x7000 0x0 0x1>;
> 
> Please name the register ressources instead of relying on the order
ok
> 
> Also, use the actual size of region, not the size you are using in the
> driver. AFAIK, the size of the 2nd region is not 0x1
yes, it should be 0x4 here, i will fix it.
we only need to use a 32bits SDEMMC_CLOCK register.
thanks.
> 
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> +
>> +	clocks = <&clkc CLKID_SD_EMMC_C>,
>> +		<&clkc CLKID_FCLK_DIV2>;
>> +	clock-names = "core", "device";
>> +
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&nand_pins>;
>> +
>> +	nand at 0 {
>> +		reg = <0>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +
>> +		nand-on-flash-bbt;
>> +	};
>> +     };
>> +
>> +...
>> \ No newline at end of file
> 
> .