GAS Query Failed on Association

[Shyam]

Hi All,

Following is the log that was obtained when the DUT was associated to
an AP, failed to fetch ANQP Information of another AP( both APs are on
different channels).


D/wpa_supplicant( 1534): wpa_supplicant_ctrl_iface_process
D/wpa_supplicant( 1534): New RX ctrl_iface - hexdump(len=30): [REMOVED]
D/wpa_supplicant( 1534): RX ctrl_iface - hexdump(len=30): 41 4e 51 50
5f 47 45 54 20 38 63 3a 30 63 3a 39 30 3a 30 36 3a 31 63 3a 33 64 20
32 36 31
I/wpa_supplicant( 1534): ANQP: Query Request to 8c:0c:90:06:1c:3d for 1 id(s)
D/wpa_supplicant( 1534): GAS: Starting request for 8c:0c:90:06:1c:3d
dialog_token 0
D/wpa_supplicant( 1534): GAS: Send action frame to 8c:0c:90:06:1c:3d
len=15 freq=5220
D/wpa_supplicant( 1534): GAS: gas_query_tx 8c:0c:90:06:1c:3d len=15
gas=0x85d42c0
D/wpa_supplicant( 1534): Off-channel: Send action frame: freq=5220
dst=8c:0c:90:06:1c:3d src=08:00:28:de:ad:00 bssid=8c:0c:90:06:1c:3d
len=15
D/wpa_supplicant( 1534): nl80211: Send Action frame (ifindex=4,
freq=5220 MHz wait=1000 ms no_cck=0)
D/wpa_supplicant( 1534): nl80211: CMD_FRAME freq=5220 wait=1000
no_cck=0 no_ack=0 offchanok=1
D/wpa_supplicant( 1534): nl80211: Frame TX command accepted; cookie 0xde5fecc0
I/wpa_supplicant( 1534): ANQP: Query started with dialog token 0
D/wpa_supplicant( 1534): nl80211: Event message available
D/wpa_supplicant( 1534): nl80211: MLME event 60
D/wpa_supplicant( 1534): nl80211: MLME event frame - hexdump(len=39):
d0 00 00 00 8c 0c 90 06 1c 3d 08 00 28 de ad 00 8c 0c 90 06 1c 3d a0
05 04 0a 00 6c 02 00 00 06 ...
D/wpa_supplicant( 1534): nl80211: Action TX status: cookie=0de5fecc0
(match) (ack=0)
D/wpa_supplicant( 1534): wlan0: Event TX_STATUS (18) received
D/wpa_supplicant( 1534): wlan0: EVENT_TX_STATUS dst=8c:0c:90:06:1c:3d
type=0 stype=13
D/wpa_supplicant( 1534): Off-channel: TX status result=1 cb=0x0
.....Logs here removed..............
D/wpa_supplicant( 1534): GAS: No response received for query to
8c:0c:90:06:1c:3d
D/wpa_supplicant( 1534): Off-channel: Action frame sequence done notification
D/wpa_supplicant( 1534): nl80211: wait cancel failed: ret=-2 (No such
file or directory)
I/wpa_supplicant( 1534): ANQP: anqp_resp_cb called for
8c:0c:90:06:1c:3dresult = 2

I would like to know how do we ensure we get ANQP information of an AP
which is on a different channel than the one associated.

Thanks,
Shyam