No transmissions

[Jan Hauke Rahm]

Hey people!
First of all I apologize for my bad english, I'm doing as well as possible but
it's not that easy for me. I hope I'm finding understanding from you.
My problem: I'm using Debian sarge on an AMD Duron 700. I have eth0 for ppp0
(a pppoe connection) and eth1 (IP 192.168.1.1) for LAN with Hub. Now, I
installed a Netgear MA311 with hostap drivers to use it as an access point. I
already installed the DHCP3 server for LAN and it's going very well, so now I
try to use it with thw wireless LAN. I installed hostap-source, hostap-utils,
wireless-utils, hostapd. When I type iwconfig the output is as shown below (I
added some more confs for details).
When I now try to connect from a Win2k I can see on the servers iptraf for
wlan0 some out- and ingoing packets. The Win2k just sends but doesn't receive
anything and the dhcpd doesn't add any lease for WLAN.
So, I hope you're able to help me, I'm helpless :(

hauke



iwconfig:
wifi0     IEEE 802.11b  ESSID:"jhr-net"
          Mode:Master  Frequency:2.422 GHz  Access Point: 00:09:5B:68:E8:0D
          Bit Rate:11 Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:3  Invalid misc:78   Missed beacon:0

wlan0     IEEE 802.11b  ESSID:"jhr-net"
          Mode:Master  Frequency:2.422 GHz  Access Point: 00:09:5B:68:E8:0D
          Bit Rate:11 Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:3  Invalid misc:78   Missed beacon:0

wlan0ap   IEEE 802.11b  ESSID:"jhr-net"
          Mode:Master  Frequency:2.422 GHz  Access Point: 00:09:5B:68:E8:0D
          Bit Rate:11 Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off


hostapd.conf:
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump

ssid=jhr-net
macaddr_acl=1
accept_mac_file=/etc/hostapd/hostapd.accept
deny_mac_file=/etc/hostapd/hostapd.deny


dhcpd.conf:
default-lease-time 21600;
max-lease-time 43200;
authoritative;
option domain-name ".." #that doesn't matter, does it?
# LAN
subnet 192.168.1.0 netmask 255.255.255.128 {
  option routers 192.168.1.1;
  option subnet-mask 255.255.255.128;
  option broadcast-address 192.168.1.127;
  option netbios-name-servers 192.168.1.1;
  option domain-name-servers 192.168.1.1;
  range 192.168.1.10 192.168.1.19;
}
# WLAN
subnet 192.168.1.128 netmask 255.255.255.128 {
  option routers 192.168.1.129;
  option subnet-mask 255.255.255.128;
  option broadcast-address 192.168.1.255;
  option netbios-name-servers 192.168.1.1;
  option domain-name-servers 192.168.1.1;
  range 192.168.1.210 192.168.1.219;
}