can't connect to AP

Bryan Kadzban bryan
Thu Oct 20 04:05:35 PDT 2005


none none wrote:
>>ap_scan=1
>>
>>network={
>>        key_mgmt=WPA-PSK
>>        psk="mypassword"
>>        ssid="mydomain"
>>        }

Are you sure that's the right SSID?  According to your log, it's not
showing up in the scan:

>>Scan results: 2
>>Selecting BSS from priority group 0
>>0: [REMOVED] ssid='otherdomain1' wpa_ie_len=24
>>rsn_ie_len=0
>>
>>   skip - SSID mismatch
>>1: [REMOVED] ssid='otherdomain2' wpa_ie_len=0
>>rsn_ie_len=0 
>>   skip - no WPA/RSN IE
>>No suitable AP found.

It only sees SSIDs of "otherdomain1" (using WPA1) and "otherdomain2"
(using either no encryption, or WEP), not "mydomain".

Maybe you need to set ap_scan=2 if the SSID IE is not being put into the
beacons?  Read the example config file, though, because you'll need to
do other stuff if you set ap_scan=2.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 256 bytes
Desc: OpenPGP digital signature
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20051020/acf7ce53/attachment.pgp 



More information about the Hostap mailing list