Upgrade to new kernel stops wpa

[Stefan]

Have you tried to switch on SSID broadcast on your AP, since the debug
info says, the SSID doesn't match.

...........................

Selecting BSS from priority group 0
0: 00:12:a9:05:d8:e6 ssid='<hidden>' wpa_ie_len=26 rsn_ie_len=0
   skip - SSID mismatch
No suitable AP found.

................


I'd try with SSID broadcast enabled for the AP if that works, you know
where to look.



M?rten Thomasson wrote:

>Pedro Ramalhais wrote:
>  
>
>>use -Dwext instead of -Dipw
>>    
>>
>
>Thx for quick reply. I tried using the generic wireless extensions as you
>suggested, but I still get the same error. Below I attach the debug output
>from both my attempts, both for ipw drivers and for wext drivers. After the
>error message "No suitable AP found", the application repeats the process in
>finding an AP, endlessly. The AP is configured to not broadcast the ESSID,
>but the ESSID is included in the wpa_supplicant.conf.
>
>At the top of the output I've included the command. Just to clarify myself:
>I have a intel 2200BG in the computer, and I have used the ipw
>driver+wpa_supplicant under the 2.6.12 kernel without problem.
>To me, it seems as if there is an error when setting the encryption, but I'm
>unsure. And I definitely don't know how to fix it. 
>Anyone???
>
>
>wpa_supplicant -c /etc/wpa_supplicant.conf -i eth0 -d -D wext
>
>Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'wext'
>Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
>Reading configuration file '/etc/wpa_supplicant.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ctrl_interface_group=10 (from group name 'wheel')
>ctrl_interface='/var/run/wpa_supplicant'
>Priority group 0
>   id=0 ssid='strangelands'
>Initializing interface (2) 'eth0'
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>Own MAC address: 00:12:f0:59:ce:8e
>wpa_driver_wext_set_wpa
>SIOCGIWRANGE: WE(compiled)=18 WE(source)=16 enc_capa=0x0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_countermeasures
>wpa_driver_wext_set_drop_unencrypted
>Setting scan request: 0 sec 100000 usec
>Wireless event: cmd=0x8b06 len=8
>Starting AP scan (broadcast SSID)
>Scan timeout - try to get results
>Received 280 bytes of scan results (1 BSSes)
>Scan results: 1
>Selecting BSS from priority group 0
>0: 00:12:a9:05:d8:e6 ssid='<hidden>' wpa_ie_len=26 rsn_ie_len=0
>   skip - SSID mismatch
>No suitable AP found.
>Setting scan request: 5 sec 0 usec
>
>Below is the output when I use the ipw driver:
>
>wpa_supplicant -c /etc/wpa_supplicant.conf -i eth0 -d -D ipw
>Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'ipw'
>Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
>Reading configuration file '/etc/wpa_supplicant.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ctrl_interface_group=10 (from group name 'wheel')
>ctrl_interface='/var/run/wpa_supplicant'
>Priority group 0
>   id=0 ssid='strangelands'
>Initializing interface (2) 'eth0'
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>wpa_driver_ipw_init is called
>Own MAC address: 00:12:f0:59:ce:8e
>wpa_driver_ipw_set_wpa: enabled=1
>wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
>Failed to set encryption.
>wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
>Failed to set encryption.
>wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
>Failed to set encryption.
>wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
>Failed to set encryption.
>wpa_driver_ipw_set_countermeasures: enabled=0
>wpa_driver_ipw_set_drop_unencrypted: enabled=1
>Setting scan request: 0 sec 100000 usec
>Wireless event: cmd=0x8b06 len=8
>Starting AP scan (broadcast SSID)
>Scan timeout - try to get results
>Received 280 bytes of scan results (1 BSSes)
>Scan results: 1
>Selecting BSS from priority group 0
>0: 00:12:a9:05:d8:e6 ssid='<hidden>' wpa_ie_len=26 rsn_ie_len=0
>   skip - SSID mismatch
>No suitable AP found.
>Setting scan request: 5 sec 0 usec
>
>
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap
>
>  
>


	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de