wpa-psk with hostap problem to associate

[Matthias Lemke]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

i am using hostap + wpa_supplicant (0.3.8)
STA firmware is 1.7.4

The AP is configured to: WPA-PSK with TKIP.
ssid "seclan" is broadcasted.

I set "iwconfig wlan0 essid "seclan"

/usr/sbin/wpa_supplicant -w  -i wifi0 -d -c /etc/wpa_supplicant.conf

Kernel is 2.6.14

the config includes:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
#eapol_version=1
#ap_scan=0



network={
        ssid="seclan"
        scan_ssid=1
        key_mgmt=WPA-PSK
        proto=WPA
        pairwise=TKIP
        group=TKIP
        psk=aaf189c326f0a3f9813fc089955027868fb6f33ae647985d591d6b6b637283a5
}


and a debug output looks like:


Scan SSID - hexdump_ascii(len=6):
     73 65 63 6c 61 6e                                 seclan
Wireless event: cmd=0x8b19 len=8
IWEVGENIE overflow
Received 209 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:13:10:15:45:4a ssid='' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
No APs found - clear blacklist and try again
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Selecting BSS from priority group 0
0: 00:13:10:15:45:4a ssid='' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Signal 2 received - terminating
No keys have been configured - skip key clearing


what happens?

regards and thanks

math
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFDdKrTpmSFPkdbqigRAhW/AKCVpCSMyrj9/+ZhEzP6QNPaO5ffiQCfcTCt
W9Oks3n8JDbXHGP6QfyGYpo=
=259W
-----END PGP SIGNATURE-----