status of prism54-wpa for hostapd

[Jers]

Hi Tobias,
 
I?m trying the WPA-PSK Access point throughout prism54 and hostapd and I had
same problems. When you run ifconfig
you should have both eth2 and eth2ap interfaces. In this case you have to
do:
 
Ifconfig eth2ap up
 
in order to run hostapd. 
 
Doing that, hostapd seems to work fine. Moreover, stations detect the AP
protected with WPA.
Unfortunately I can?t get the connection between clients and AP. Seems that
the AP does not listen to the connection requests.
 
If you try to test WPA with prism54, please let me know if it works!
 
Thanks.
Jers
 
 
 
 
>Hello,
>I am using the current snapshot from the prism54 drivers (not the kernel
one).
>Running hostapd without WPA works without problems.
> 
>The Problem:
>hostapd with WPA (wpa=1) exits with an errormessage.
> 
>The command:
>$ hostapd hostapd.conf
>Configuration file: hostapd.conf
>Using interface eth2 with hwaddr 00:01:36:0d:c2:ea and ssid 'test'
>Could not set PrivacyInvoked for interface eth2
>WPA initialization failed.
>rmdir[ctrl_interface]: No such file or directory
>Could not disable PrivacyInvoked for interface eth2
>$ dmesg|tail -n 3
>ap_net_ioctl: Ioctls for AP devices are NOT supported in this driver.
>ap_net_ioctl: Ioctls for AP devices are NOT supported in this driver.
>ap_net_ioctl: Ioctls for AP devices are NOT supported in this driver.
> 
> 
>Are there any activities for hostapd with wpa for prism54 cards?
>Is there any chance to get this running or should kick away the prism54
>card and buy an atheros card?
 
 

 


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.10/188 - Release Date: 29/11/2005
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20051130/c237c425/attachment.htm