Firmware Station for WPA

Michael Walter
Fri Mar 18 02:36:09 PST 2005

I am using firmware 1.7.4 which is known to work well. Also think about
upgrading the primary firmware too. "hostap_diag wlan0" shows for my

Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)


On Fri, 18 Mar 2005 11:26:52 +0100 "roby" <roby at> wrote:
> Hi list,
>   i'm trying to set hostapd to work with WPA-TKIP and authentication
> mode EAP-TLS. The autentication goes rights, but the Access point
> deassociate the stations...  I'm using hostap driver 0.2.4, redhat9b.
> I'm using a netgear MA401 PCI with firmware 1.3.6, is this the
> problem? Do I have to upgrade the firmware? If yes wich one, 1.7 or
> more?
> Thanks
> R.
> _______________________________________________
> HostAP mailing list
> HostAP at

More information about the Hostap mailing list