No DHCPOFFERS received dwl-520e

[Peter]

hi!

in your first mail you wrote that everything works except your dhcp
client. so can we assume that really everything works if you assign
static ips?

case yes:
 -check your configuration again
 -update your dhcp client
 -ask some debian and/or linksys people for help (maybe they are already
aware of this problem and have a workaround/bugfix)

case no:
 -forget the wlan-script
 -try setting up your card manually
 -check for success and failure (and report it)

regards,
peter


On Thu, 25 Mar 2004 22:24:40 -0500
glenn greenfield <glenngreenfield at adelphia.net> wrote:

> Thanks to Andrew I'm this close to having the dwl-520 working inder
> Debian SID 2.6.4.  I thought I'd pass this along.  To get rc.wlan to
> run on boot under Debian first do a simple edit to the rc.wlan script
> for Debian:
> 
> search & replace /usr/sbin/iwconfig w/ /sbin/iwconfig
> 
> chmod +x rc.wlan
> cp rc.wlan /etc/init.d
> update-rc.d rc.wlan defaults
> 
> I still don't have the card working but I'm close.  Probably a
> misconfiguration on either the router (Linksys wrt4g) r my wlan card
> but I'll get it eventually.  
> 
> # /etc/init.d/rc.wlan restart
> wlan0
> wlan0
> srec summary for pm010102.hex
> Included file name: PM010102.HEX
> Component: 0x0015 1.1.2 (primary firmware)
> 
> 
> Verifying update compatibility and combining data:
> Plugging PDR 0400 (NIC configuration): ram16=1 pci=1 (07 00)
> OK.
> 
> Downloading to volatile memory (RAM).
> OK.
> srec summary for pm010102.hex
> Included file name: PM010102.HEX
> Component: 0x0015 1.1.2 (primary firmware)
> 
> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> STAID not available (maybe running PRI-only)
> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> 
> Verifying update compatibility and combining data:
> OK.
> 
> Downloading to volatile memory (RAM).
> OK.
> srec summary for rf010800.hex
> Included file name: RF010800.hex
> Component: 0x001f 1.8.0 (station firmware)
> 
> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> STAID not available (maybe running PRI-only)
> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> 
> Verifying update compatibility and combining data:
> Could not find data position for plugging PDR 0x0413 at 0x0000118e
> (len=2)
> PDR 0x0413 is not in wlan card PDA and there is no default data.
> Ignoring plug record.
> OK.
> 
> Downloading to volatile memory (RAM).
> OK.
> Components after download:
>   NICID: 0x8024 v1.0.0
>   PRIID: 0x0015 v1.1.2
>   STAID: 0x001f v1.8.0
> Internet Software Consortium DHCP Client V3.0.1rc13
> Copyright 1995-2002 Internet Software Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
> 
> wifi0: unknown hardware address type 801
> sit0: unknown hardware address type 776
> wifi0: unknown hardware address type 801
> sit0: unknown hardware address type 776
> Listening on LPF/wlan0/00:0d:88:4b:df:69
> Sending on   LPF/wlan0/00:0d:88:4b:df:69
> Sending on   Socket/fallback
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 19
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 2
> No DHCPOFFERS received.
> No working leases in persistent database - sleeping.
> 
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap