prism2_srec problem in 0.2.4 version

[Jar]

Hello

With the new driver and tools after the command: prism2_srec -r -i wlan0
r1010701.hex the card doesn't work any more as it perfectly did with the
0.1.3 version and tools.

prism2_download: dl_cmd=1 start_addr=0x000f8c01 num_areas=2
prism2_hw_init: initialized in 63 ms
prism2_hw_init: initialized in 35 ms
wifi0: NIC: id=0x8002 v1.0.1
wifi0: PRI: id=0x15 v0.3.0
wifi0: STA: id=0x1f v1.7.1
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
wifi0: prism2_tx_80211: hw not ready - skipping
printk: 1 messages suppressed.
wifi0: prism2_tx_80211: hw not ready - skipping

Any solution to this?

-- 
Best Regards, Jar