prism2_srec problem in 0.2.4 version

[Brian Sturgill]

You really should download a primary firmware along with it. Your primary 
firmware is ancient :)

Example: prism2_srec -r wlan0 ak010101.hex rf010800.hex

You can also use -i as before.

Regards,
Brian


>From: "Jar" <jar at pcuf.fi>
>To: hostap at shmoo.com
>Subject: prism2_srec problem in 0.2.4 version
>Date: Wed, 21 Jul 2004 11:32:06 +0300 (EEST)
>
>Hello
>
>With the new driver and tools after the command: prism2_srec -r -i wlan0
>r1010701.hex the card doesn't work any more as it perfectly did with the
>0.1.3 version and tools.
>
>prism2_download: dl_cmd=1 start_addr=0x000f8c01 num_areas=2
>prism2_hw_init: initialized in 63 ms
>prism2_hw_init: initialized in 35 ms
>wifi0: NIC: id=0x8002 v1.0.1
>wifi0: PRI: id=0x15 v0.3.0
>wifi0: STA: id=0x1f v1.7.1
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>wifi0: prism2_tx_80211: hw not ready - skipping
>printk: 1 messages suppressed.
>wifi0: prism2_tx_80211: hw not ready - skipping
>
>Any solution to this?
>
>--
>Best Regards, Jar
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar ? get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/