DWL-650 rev P - no progress with CVS hostap..

[Joshua Kwan]

On Sat, Feb 28, 2004 at 09:10:15PM -0500, Pavel Roskin wrote:
> > # ./prism2_srec  -g wifi0 primary/pm010102.hex
> 
> You should use "-s" at this point to skip PDA reading.  PDA is not
> available yet.

Ok, sorry for the spam, but here's what happened with prism2_srec -gs:

prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: init command completed too quickly - retrying
prism2_hw_init: initialized in 0 ms
prism2_enable_aux_port(1) timed out
prism2_enable_aux_port: was not enabled!?
wifi0: valid PDA not found
SWSUPPORT0 write/read failed: FFFF != 8A32
hostap_cs: Initialization failed
wifi0: Initialization(2) after genesis mode download failed

Hope it helps.

-- 
Joshua Kwan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 827 bytes
Desc: Digital signature
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20040228/a68a0f29/attachment.pgp