Hostap+avaya pci-card+SURECOM PCMCIA-CARD(EP-9427)+RHL 9.0

[Jouni Malinen]

On Thu, Aug 14, 2003 at 12:53:05PM +0530, Anand S. Katti wrote:

> modprobe hostap_cs

You should not load PC Card modules manually. Let cardmgr take care of
that.

> Output from the lsmod
> -------------------------
> hostap_cs              41192   0  (unused)
> orinoco_cs              5864   1

You are not using Host AP driver, but orinoco_cs.

> Output from the iwconfig
> ------------------------
> eth2      IEEE 802.11-DS  ESSID:"default"  Nickname:"Prism  I"

> Output from the dmesg
> ----------------------
> eth2: Error -110 writing Tx descriptor to BAP

These are from orinoco driver..

> My test bed setup
> 1)
>  A(hostap_cs)-------B
> 'A' is running above configuration with hostap.
> It has only one interface that too eth2(pcmcia wirless card with hostap)

No, it is not running Host AP.

-- 
Jouni Malinen                                            PGP id EFC895FA