[PATCH 5/7] mfd: rk808: add support for RK806
Sascha Hauer
s.hauer at pengutronix.de
Tue Oct 15 04:11:02 PDT 2024
This adds support for the RK806 to the rk808 driver. Additionally to
I2C this variant comes with SPI support, so add SPI probe support to the
driver.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 103 +++++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 104 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5189364c2c..dabe71dbdc 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -119,8 +119,8 @@ config MFD_ATMEL_FLEXCOM
config MFD_RK808
tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
- depends on I2C && OFDEVICE
- select REGMAP_I2C
+ depends on (I2C || SPI) && OFDEVICE
+ select REGMAP_I2C if I2C
help
If you say yes here you get support for the RK805, RK808, RK809,
RK817 and RK818 Power Management chips.
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 788e463c20..5b010e09ef 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -22,6 +22,7 @@
#include <poweroff.h>
#include <of.h>
#include <linux/regmap.h>
+#include <spi/spi.h>
struct rk808_reg_data {
int addr;
@@ -61,6 +62,12 @@ static const struct mfd_cell rk805s[] = {
{ .name = "rk805-pwrkey", },
};
+static const struct mfd_cell rk806s[] = {
+ { .name = "rk805-pinctrl", },
+ { .name = "rk808-regulator", },
+ { .name = "rk805-pwrkey", },
+};
+
static const struct mfd_cell rk808s[] = {
{ .name = "rk808-clkout", },
{ .name = "rk808-regulator", },
@@ -94,6 +101,12 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
};
+static const struct rk808_reg_data rk806_pre_init_reg[] = {
+ { RK806_GPIO_INT_CONFIG, RK806_INT_POL_MSK, RK806_INT_POL_L },
+ { RK806_SYS_CFG3, RK806_SLAVE_RESTART_FUN_MSK, RK806_SLAVE_RESTART_FUN_EN },
+ { RK806_SYS_OPTION, RK806_SYS_ENB2_2M_MSK, RK806_SYS_ENB2_2M_EN },
+};
+
static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
@@ -274,6 +287,12 @@ static int rk8xx_probe(struct device *dev, int variant, struct regmap *regmap)
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
break;
+ case RK806_ID:
+ pre_init_reg = rk806_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk806_pre_init_reg);
+ cells = rk806s;
+ nr_cells = ARRAY_SIZE(rk806s);
+ break;
case RK808_ID:
pre_init_reg = rk808_pre_init_reg;
nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
@@ -399,6 +418,75 @@ static int rk808_probe(struct device *dev)
return rk8xx_probe(dev, variant, regmap);
}
+#define RK806_ADDR_SIZE 2
+#define RK806_CMD_WITH_SIZE(CMD, VALUE_BYTES) \
+ (RK806_CMD_##CMD | RK806_CMD_CRC_DIS | (VALUE_BYTES - 1))
+
+static const struct regmap_config rk806_regmap_config_spi = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = RK806_BUCK_RSERVE_REG5,
+};
+
+static int rk806_spi_bus_write(void *context, const void *vdata, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer xfer[2] = { 0 };
+ /* data and thus count includes the register address */
+ size_t val_size = count - RK806_ADDR_SIZE;
+ char cmd;
+
+ if (val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+ return -EINVAL;
+
+ cmd = RK806_CMD_WITH_SIZE(WRITE, val_size);
+
+ xfer[0].tx_buf = &cmd;
+ xfer[0].len = sizeof(cmd);
+ xfer[1].tx_buf = vdata;
+ xfer[1].len = count;
+
+ return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
+}
+
+static int rk806_spi_bus_read(void *context, const void *vreg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ char txbuf[3] = { 0 };
+
+ if (reg_size != RK806_ADDR_SIZE ||
+ val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+ return -EINVAL;
+
+ /* TX buffer contains command byte followed by two address bytes */
+ txbuf[0] = RK806_CMD_WITH_SIZE(READ, val_size);
+ memcpy(txbuf+1, vreg, reg_size);
+
+ return spi_write_then_read(spi, txbuf, sizeof(txbuf), val, val_size);
+}
+
+static const struct regmap_bus rk806_regmap_bus_spi = {
+ .write = rk806_spi_bus_write,
+ .read = rk806_spi_bus_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+static int rk808_probe_spi(struct device *dev)
+{
+ struct regmap *regmap;
+
+ regmap = regmap_init(dev, &rk806_regmap_bus_spi,
+ dev, &rk806_regmap_config_spi);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to init regmap\n");
+
+ return rk8xx_probe(dev, RK806_ID, regmap);
+}
+
static const struct of_device_id rk808_of_match[] = {
{ .compatible = "rockchip,rk805" },
{ .compatible = "rockchip,rk808" },
@@ -409,13 +497,26 @@ static const struct of_device_id rk808_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rk808_of_match);
-static struct driver rk808_i2c_driver = {
+static __maybe_unused struct driver rk808_i2c_driver = {
.name = "rk808",
.of_compatible = rk808_of_match,
.probe = rk808_probe,
};
coredevice_i2c_driver(rk808_i2c_driver);
+static const struct of_device_id rk808_spi_of_match[] = {
+ { .compatible = "rockchip,rk806" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static __maybe_unused struct driver rk808_spi_driver = {
+ .name = "rk808",
+ .of_compatible = rk808_spi_of_match,
+ .probe = rk808_probe_spi,
+};
+coredevice_spi_driver(rk808_spi_driver);
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw at rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing at rock-chips.com>");
--
2.39.5
More information about the barebox
mailing list