rk3568 boot fail with TF-A binary

[Ahmad Fatoum]

On 28.06.24 15:56, Alexander Shiyan wrote:
> I changed the patch to reflect this for rk3568 rather than rk3588.
> The patch doesn't help. I tried it with and without the
> CONFIG_DIGEST_SHA256_ARM64_CE option.

Do you still get a crash when CONFIG_DIGEST_SHA1_ARM64_CE is disabled?

Cheers,
Ahmad

> 
> ...
>>>>> I'm trying to use the open source TF-A implementation for the Rockchip
>>>>> rk3568 CPU:
>>>>> https://github.com/ARM-software/arm-trusted-firmware/commit/9fd9f1d024872b440e3906eded28037330b6f422
> ...
>>>> Assuming this stack trace is accurate, it looks like the crypto extensions
>>>> use may upset the CPU? Do you have CONFIG_DIGEST_SHA256_ARM64_CE enabled?
>>>> Does this issue happen when you disable it?
>>>
>>> The error is still here. New log (without CONFIG_DIGEST_SHA256_ARM64_CE) below.
>>>
>>>> Did you call rk3588_lowlevel_init() in your entry point?
>>> RK3568 :)
>>> Yes, it called from rk3568_barebox_entry().
>>>
>>>
>>> Board: Diasom DS-RK3568-EVB
>>> deep-probe: supported due to diasom,ds-rk3568-evb
>>> rockchip-dmc memory-controller.of: Detected memory size: 0x0000000200000000
>>> netconsole: registered as netconsole-1
>>> rk808 rk8090: chip id: 0x8090
>>> vdd_npu: Bringing 500000uV into 850000-850000uV
>>> vdda0v9_image: Bringing 600000uV into 900000-900000uV
>>> vcca1v8_image: Bringing 600000uV into 1800000-1800000uV
>>> rockchip_saradc fe720000.saradc at fe720000.of: registered as aiodev0
>>> Boot source: usb, instance 0
>>> psci psci.of: detected version 1.1
>>> xHCI xHCI0: USB XHCI 1.10
>>> mdio_bus: miibus0: probed
>>> dw_mmc fe2b0000.mmc at fe2b0000.of: registered as mmc0
>>> rk3568-dwcmshc-sdhci fe310000.mmc at fe310000.of: registered as mmc1
>>> mmc1: detected MMC card version 5.1
>>> mmc1: registered mmc1.boot0
>>> mmc1: registered mmc1.boot1
>>> mmc1: registered mmc1
>>> mdio_bus: miibus1: probed
>>> Setup Machine ID from EMMC serial: 30948368
>>> Unknown/Uncategorized exception (ESR 0x02000000) at 0xbf96b7282ba34bf3
>>> elr: 00000000efd7da48 lr : 00000000efd7d7e0
>>> x0 : 00000000afdc1b10 x1 : 00000000afdc1b70
>>> x2 : 0000000000000000 x3 : 0000000000000020
>>> x4 : 0000000000000000 x5 : 00000000efff7dd8
>>> x6 : 00000000ca62c1d6 x7 : 0000000000000000
>>> x8 : 00000000afdc1b68 x9 : 0000000000000000
>>> x10: 0000000000000000 x11: 00000000fffffff6
>>> x12: 00000000fffffff6 x13: 0000000000000020
>>> x14: 0000000000000000 x15: 0000000000000003
>>> x16: 00000000efff7968 x17: 0000000000000003
>>> x18: 00000000efff7ef0 x19: 0000000000000001
>>> x20: 00000000afdc1b30 x21: 00000000afdc1b10
>>> x22: 00000000afdc1b30 x23: 00000000ef600000
>>> x24: 0000000000b35a40 x25: 0000000000080051
>>> x26: 0000000000106858 x27: 00000000effe0000
>>> x28: 0000000000000000 x29: 00000000efff7e40
>>>
>>> Call trace:
>>> [<efd7da48>] (sha1_ce_transform+0x64/0x224) from [<efd7d8b0>]
>>> (sha1_ce_final+0xbc/0x114)
>>> [<efd7d8b0>] (sha1_ce_final+0xbc/0x114) from [<efd0297c>]
>>> (machine_id_set_globalvar+0x7c/0x100)
>>> [<efd0297c>] (machine_id_set_globalvar+0x7c/0x100) from [<efd01adc>]
>>> (start_barebox+0x60/0x8c)
>>> [<efd01adc>] (start_barebox+0x60/0x8c) from [<efd7bf1c>]
>>> (barebox_non_pbl_start+0x11c/0x150)
>>> [<efd7bf1c>] (barebox_non_pbl_start+0x11c/0x150) from [<efd0000c>]
>>> (__bare_init_start+0x0/0x14)
>>> [<efd0000c>] (__bare_init_start+0x0/0x14) from [<00b01d8c>] (0xb01d8c)
>>> [<00b01d8c>] (0xb01d8c) from [<00b01640>] (0xb01640)
>>> panic: unhandled exception
>>> ### ERROR ### Please RESET the board ###
>>
>> I expect that without CONFIG_DIGEST_SHA1_ARM64_CE, the crash goes away?
>> If yes, can you try out the patch I just Cc'd you on?
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |