rk3568 boot fail with TF-A binary

[Ahmad Fatoum]

Hello Alexander,

On 28.06.24 14:47, Alexander Shiyan wrote:
> Hello Ahmad.
> 
>>> I'm trying to use the open source TF-A implementation for the Rockchip
>>> rk3568 CPU:
>>> https://github.com/ARM-software/arm-trusted-firmware/commit/9fd9f1d024872b440e3906eded28037330b6f422
> ...
>>> Setup Machine ID from EMMC serial: 30948368
>>
>> Nice! I think this would be cool to have upstream in barebox:
>> If the SD/eMMC is the boot medium and there is no SoC machine ID, take the
>> boot medium machine id.
> 
> This is a useful feature, but I don't know how best to package it as a
> patch so that
> it can be used from different boards. Can you take it for yourself?
> https://github.com/MacroGroup/barebox/blob/macro/arch/arm/boards/diasom-rk3568-evb/board.c#L123

Thanks. I had a patch that never made it upstream that allowed boards to set

/chosen/machine-id to point at a nvmem cell to use for calculating the machine ID.
Maybe I could respin that. Will think about it.

In the meantime, feel free to upstream your board though. Making this particular
feature generic can happen later.

>> Assuming this stack trace is accurate, it looks like the crypto extensions
>> use may upset the CPU? Do you have CONFIG_DIGEST_SHA256_ARM64_CE enabled?
>> Does this issue happen when you disable it?
> 
> The error is still here. New log (without CONFIG_DIGEST_SHA256_ARM64_CE) below.
> 
>> Did you call rk3588_lowlevel_init() in your entry point?
> RK3568 :)
> Yes, it called from rk3568_barebox_entry().
> 
> 
> Board: Diasom DS-RK3568-EVB
> deep-probe: supported due to diasom,ds-rk3568-evb
> rockchip-dmc memory-controller.of: Detected memory size: 0x0000000200000000
> netconsole: registered as netconsole-1
> rk808 rk8090: chip id: 0x8090
> vdd_npu: Bringing 500000uV into 850000-850000uV
> vdda0v9_image: Bringing 600000uV into 900000-900000uV
> vcca1v8_image: Bringing 600000uV into 1800000-1800000uV
> rockchip_saradc fe720000.saradc at fe720000.of: registered as aiodev0
> Boot source: usb, instance 0
> psci psci.of: detected version 1.1
> xHCI xHCI0: USB XHCI 1.10
> mdio_bus: miibus0: probed
> dw_mmc fe2b0000.mmc at fe2b0000.of: registered as mmc0
> rk3568-dwcmshc-sdhci fe310000.mmc at fe310000.of: registered as mmc1
> mmc1: detected MMC card version 5.1
> mmc1: registered mmc1.boot0
> mmc1: registered mmc1.boot1
> mmc1: registered mmc1
> mdio_bus: miibus1: probed
> Setup Machine ID from EMMC serial: 30948368
> Unknown/Uncategorized exception (ESR 0x02000000) at 0xbf96b7282ba34bf3
> elr: 00000000efd7da48 lr : 00000000efd7d7e0
> x0 : 00000000afdc1b10 x1 : 00000000afdc1b70
> x2 : 0000000000000000 x3 : 0000000000000020
> x4 : 0000000000000000 x5 : 00000000efff7dd8
> x6 : 00000000ca62c1d6 x7 : 0000000000000000
> x8 : 00000000afdc1b68 x9 : 0000000000000000
> x10: 0000000000000000 x11: 00000000fffffff6
> x12: 00000000fffffff6 x13: 0000000000000020
> x14: 0000000000000000 x15: 0000000000000003
> x16: 00000000efff7968 x17: 0000000000000003
> x18: 00000000efff7ef0 x19: 0000000000000001
> x20: 00000000afdc1b30 x21: 00000000afdc1b10
> x22: 00000000afdc1b30 x23: 00000000ef600000
> x24: 0000000000b35a40 x25: 0000000000080051
> x26: 0000000000106858 x27: 00000000effe0000
> x28: 0000000000000000 x29: 00000000efff7e40
> 
> Call trace:
> [<efd7da48>] (sha1_ce_transform+0x64/0x224) from [<efd7d8b0>]
> (sha1_ce_final+0xbc/0x114)
> [<efd7d8b0>] (sha1_ce_final+0xbc/0x114) from [<efd0297c>]
> (machine_id_set_globalvar+0x7c/0x100)
> [<efd0297c>] (machine_id_set_globalvar+0x7c/0x100) from [<efd01adc>]
> (start_barebox+0x60/0x8c)
> [<efd01adc>] (start_barebox+0x60/0x8c) from [<efd7bf1c>]
> (barebox_non_pbl_start+0x11c/0x150)
> [<efd7bf1c>] (barebox_non_pbl_start+0x11c/0x150) from [<efd0000c>]
> (__bare_init_start+0x0/0x14)
> [<efd0000c>] (__bare_init_start+0x0/0x14) from [<00b01d8c>] (0xb01d8c)
> [<00b01d8c>] (0xb01d8c) from [<00b01640>] (0xb01640)
> panic: unhandled exception
> ### ERROR ### Please RESET the board ###

I expect that without CONFIG_DIGEST_SHA1_ARM64_CE, the crash goes away?
If yes, can you try out the patch I just Cc'd you on?

Cheers,
Ahmad


> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |