[PATCH v3 00/15] ARM: at91: skov-arm9cpu (SAM9263) first stage support

[Ahmad Fatoum]

Hello Sam,

On 15.02.24 23:33, Sam Ravnborg wrote:
> Hi Ahmad,
> 
> On Thu, Feb 15, 2024 at 05:29:54PM +0100, Ahmad Fatoum wrote:
>> SDRAM setup and SD-Card chainloading support were previously added[1]
>> by Sam as well as a WIP patch to enable them for Skov ARM9CPU.
>>
>> I reworked his final WIP patch and fixed some smaller and bigger issues
>> that I ran into. Now barebox can replace at91bootstrap on this platform
>> when booted from SD.
>>
>> What didn't work for me were USB and Ethernet, but these didn't work in
>> Linux either when booted with the same device tree. I suspect this to be
>> related, but I don't have use for either USB or Ethernet in barebox at
>> this time, so I am happy with functional SD and nor flash.
>>
>> All patches are new ones, except for 11/15, which contains a changelog.
>>
>> [1]: https://lore.barebox.org/barebox/20220628203849.2785611-12-sam@ravnborg.org/
>>
> 
> thanks for picking up this work and finish it.
> There we several fixes in the patch-set I would never have found - nice
> work!

There might still be some dragons in the other drivers, so feel free
to tackle them. :-)

> All patches are:
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> 
> Except "ARM: at91: skov-arm9cpu: Add SD-Card xload support" - see my
> comment about the hardcoded hex-values.
> 
> If the hard-coded hex-values are updated to use the existing defines
> this patch is also:
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

Thanks for the review. Will include the tag in v2.

Cheers,
Ahmad

> 
> 	Sam
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |