[PATCH 4/4] video: add Ilitek ILI9341 panel support

Ahmad Fatoum a.fatoum at pengutronix.de
Mon Jan 31 00:03:02 PST 2022


Port the Linux v5.15 DRM panel driver to barebox. This has been tested
against a STM32F4 LTDC.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 drivers/video/Makefile               |   1 +
 drivers/video/panel-ilitek-ili9341.c | 541 +++++++++++++++++++++++++++
 2 files changed, 542 insertions(+)
 create mode 100644 drivers/video/panel-ilitek-ili9341.c

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a7b70d82072a..9ec0420ccad1 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_DRIVER_VIDEO_MTL017) += mtl017.o
 obj-$(CONFIG_DRIVER_VIDEO_TC358767) += tc358767.o
 obj-$(CONFIG_DRIVER_VIDEO_SIMPLE_PANEL) += simple-panel.o
 obj-$(CONFIG_DRIVER_VIDEO_MIPI_DBI) += mipi_dbi.o
+obj-$(CONFIG_DRIVER_VIDEO_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
 
 obj-$(CONFIG_DRIVER_VIDEO_ATMEL) += atmel_lcdfb.o atmel_lcdfb_core.o
 obj-$(CONFIG_DRIVER_VIDEO_ATMEL_HLCD) += atmel_hlcdfb.o atmel_lcdfb_core.o
diff --git a/drivers/video/panel-ilitek-ili9341.c b/drivers/video/panel-ilitek-ili9341.c
new file mode 100644
index 000000000000..d8774420226d
--- /dev/null
+++ b/drivers/video/panel-ilitek-ili9341.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Ilitek ILI9341 TFT LCD driver.
+ *
+ * This panel can be configured to support:
+ * - 16-bit parallel RGB interface
+ * - 18-bit parallel RGB interface
+ * - 4-line serial spi interface
+ *
+ * Copyright 2018 David Lechner <david at lechnology.com>
+ * Copyright (C) 2021 Dillon Min <dillon.minfei at gmail.com>
+ *
+ * Derived from Linux drivers/drm/gpu/panel/panel-ilitek-ili9341.c
+ */
+#define DEBUG 1
+#include <common.h>
+#include <linux/bitops.h>
+#include <gpiod.h>
+#include <of.h>
+#include <regulator.h>
+#include <spi/spi.h>
+#include <video/vpl.h>
+#include <video/mipi_dbi.h>
+
+#include <video/mipi_display.h>
+
+#define ILI9341_RGB_INTERFACE  0xb0   /* RGB Interface Signal Control */
+#define ILI9341_FRC            0xb1   /* Frame Rate Control register */
+#define ILI9341_DFC            0xb6   /* Display Function Control register */
+#define ILI9341_POWER1         0xc0   /* Power Control 1 register */
+#define ILI9341_POWER2         0xc1   /* Power Control 2 register */
+#define ILI9341_VCOM1          0xc5   /* VCOM Control 1 register */
+#define ILI9341_VCOM2          0xc7   /* VCOM Control 2 register */
+#define ILI9341_POWERA         0xcb   /* Power control A register */
+#define ILI9341_POWERB         0xcf   /* Power control B register */
+#define ILI9341_PGAMMA         0xe0   /* Positive Gamma Correction register */
+#define ILI9341_NGAMMA         0xe1   /* Negative Gamma Correction register */
+#define ILI9341_DTCA           0xe8   /* Driver timing control A */
+#define ILI9341_DTCB           0xea   /* Driver timing control B */
+#define ILI9341_POWER_SEQ      0xed   /* Power on sequence register */
+#define ILI9341_3GAMMA_EN      0xf2   /* 3 Gamma enable register */
+#define ILI9341_INTERFACE      0xf6   /* Interface control register */
+#define ILI9341_PRC            0xf7   /* Pump ratio control register */
+#define ILI9341_ETMOD	       0xb7   /* Entry mode set */
+
+#define ILI9341_MADCTL_BGR	BIT(3)
+#define ILI9341_MADCTL_MV	BIT(5)
+#define ILI9341_MADCTL_MX	BIT(6)
+#define ILI9341_MADCTL_MY	BIT(7)
+
+#define ILI9341_POWER_B_LEN	3
+#define ILI9341_POWER_SEQ_LEN	4
+#define ILI9341_DTCA_LEN	3
+#define ILI9341_DTCB_LEN	2
+#define ILI9341_POWER_A_LEN	5
+#define ILI9341_DFC_1_LEN	2
+#define ILI9341_FRC_LEN		2
+#define ILI9341_VCOM_1_LEN	2
+#define ILI9341_DFC_2_LEN	4
+#define ILI9341_COLUMN_ADDR_LEN	4
+#define ILI9341_PAGE_ADDR_LEN	4
+#define ILI9341_INTERFACE_LEN	3
+#define ILI9341_PGAMMA_LEN	15
+#define ILI9341_NGAMMA_LEN	15
+#define ILI9341_CA_LEN		3
+
+#define ILI9341_PIXEL_DPI_16_BITS	(BIT(6) | BIT(4))
+#define ILI9341_PIXEL_DPI_18_BITS	(BIT(6) | BIT(5))
+#define ILI9341_GAMMA_CURVE_1		BIT(0)
+#define ILI9341_IF_WE_MODE		BIT(0)
+#define ILI9341_IF_BIG_ENDIAN		0x00
+#define ILI9341_IF_DM_RGB		BIT(2)
+#define ILI9341_IF_DM_INTERNAL		0x00
+#define ILI9341_IF_DM_VSYNC		BIT(3)
+#define ILI9341_IF_RM_RGB		BIT(1)
+#define ILI9341_IF_RIM_RGB		0x00
+
+#define ILI9341_COLUMN_ADDR		0x00ef
+#define ILI9341_PAGE_ADDR		0x013f
+
+#define ILI9341_RGB_EPL			BIT(0)
+#define ILI9341_RGB_DPL			BIT(1)
+#define ILI9341_RGB_HSPL		BIT(2)
+#define ILI9341_RGB_VSPL		BIT(3)
+#define ILI9341_RGB_DE_MODE		BIT(6)
+#define ILI9341_RGB_DISP_PATH_MEM	BIT(7)
+
+#define ILI9341_DBI_VCOMH_4P6V		0x23
+#define ILI9341_DBI_PWR_2_DEFAULT	0x10
+#define ILI9341_DBI_PRC_NORMAL		0x20
+#define ILI9341_DBI_VCOM_1_VMH_4P25V	0x3e
+#define ILI9341_DBI_VCOM_1_VML_1P5V	0x28
+#define ILI9341_DBI_VCOM_2_DEC_58	0x86
+#define ILI9341_DBI_FRC_DIVA		0x00
+#define ILI9341_DBI_FRC_RTNA		0x1b
+#define ILI9341_DBI_EMS_GAS		BIT(0)
+#define ILI9341_DBI_EMS_DTS		BIT(1)
+#define ILI9341_DBI_EMS_GON		BIT(2)
+
+/* struct ili9341_config - the system specific ILI9341 configuration */
+struct ili9341_config {
+	u32 max_spi_speed;
+	/* mode: the display mode */
+	const struct fb_videomode mode;
+	/* ca: TODO: need comments for this register */
+	u8 ca[ILI9341_CA_LEN];
+	/* power_b: TODO: need comments for this register */
+	u8 power_b[ILI9341_POWER_B_LEN];
+	/* power_seq: TODO: need comments for this register */
+	u8 power_seq[ILI9341_POWER_SEQ_LEN];
+	/* dtca: TODO: need comments for this register */
+	u8 dtca[ILI9341_DTCA_LEN];
+	/* dtcb: TODO: need comments for this register */
+	u8 dtcb[ILI9341_DTCB_LEN];
+	/* power_a: TODO: need comments for this register */
+	u8 power_a[ILI9341_POWER_A_LEN];
+	/* frc: Frame Rate Control (In Normal Mode/Full Colors) (B1h) */
+	u8 frc[ILI9341_FRC_LEN];
+	/* prc: TODO: need comments for this register */
+	u8 prc;
+	/* dfc_1: B6h DISCTRL (Display Function Control) */
+	u8 dfc_1[ILI9341_DFC_1_LEN];
+	/* power_1: Power Control 1 (C0h) */
+	u8 power_1;
+	/* power_2: Power Control 2 (C1h) */
+	u8 power_2;
+	/* vcom_1: VCOM Control 1(C5h) */
+	u8 vcom_1[ILI9341_VCOM_1_LEN];
+	/* vcom_2: VCOM Control 2(C7h) */
+	u8 vcom_2;
+	/* address_mode: Memory Access Control (36h) */
+	u8 address_mode;
+	/* g3amma_en: TODO: need comments for this register */
+	u8 g3amma_en;
+	/* rgb_interface: RGB Interface Signal Control (B0h) */
+	u8 rgb_interface;
+	/* dfc_2: refer to dfc_1 */
+	u8 dfc_2[ILI9341_DFC_2_LEN];
+	/* column_addr: Column Address Set (2Ah) */
+	u8 column_addr[ILI9341_COLUMN_ADDR_LEN];
+	/* page_addr: Page Address Set (2Bh) */
+	u8 page_addr[ILI9341_PAGE_ADDR_LEN];
+	/* interface: Interface Control (F6h) */
+	u8 interface[ILI9341_INTERFACE_LEN];
+	/*
+	 * pixel_format: This command sets the pixel format for the RGB
+	 * image data used by
+	 */
+	u8 pixel_format;
+	/*
+	 * gamma_curve: This command is used to select the desired Gamma
+	 * curve for the
+	 */
+	u8 gamma_curve;
+	/* pgamma: Positive Gamma Correction (E0h) */
+	u8 pgamma[ILI9341_PGAMMA_LEN];
+	/* ngamma: Negative Gamma Correction (E1h) */
+	u8 ngamma[ILI9341_NGAMMA_LEN];
+};
+
+struct ili9341 {
+	struct device_d *dev;
+	struct vpl vpl;
+	const struct ili9341_config *conf;
+	int reset_gpio;
+	int dc_gpio;
+	struct mipi_dbi *dbi;
+	u32 max_spi_speed;
+	struct regulator_bulk_data supplies[3];
+};
+
+/*
+ * The Stm32f429-disco board has a panel ili9341 connected to ltdc controller
+ */
+static const struct ili9341_config ili9341_stm32f429_disco_data = {
+	.max_spi_speed = 10000000,
+	.mode = {
+		.name = "240x320",
+		.xres = 240,
+		.yres = 320,
+		.pixclock = KHZ2PICOS(6100),
+		.left_margin = 10,
+		.hsync_len = 10,
+		.right_margin = 20,
+		.upper_margin = 4,
+		.lower_margin = 2,
+		.vsync_len = 2,
+	},
+	.ca = {0xc3, 0x08, 0x50},
+	.power_b = {0x00, 0xc1, 0x30},
+	.power_seq = {0x64, 0x03, 0x12, 0x81},
+	.dtca = {0x85, 0x00, 0x78},
+	.power_a = {0x39, 0x2c, 0x00, 0x34, 0x02},
+	.prc = 0x20,
+	.dtcb = {0x00, 0x00},
+	/* 0x00 fosc, 0x1b 70hz */
+	.frc = {0x00, 0x1b},
+	/*
+	 * 0x0a Interval scan, AGND AGND AGND AGND
+	 * 0xa2 Normally white, G1 -> G320, S720 -> S1,
+	 *	Scan Cycle 5 frames,85ms
+	 */
+	.dfc_1 = {0x0a, 0xa2},
+	/* 0x10 3.65v */
+	.power_1 = 0x10,
+	/* 0x10 AVDD=vci*2, VGH=vci*7, VGL=-vci*4 */
+	.power_2 = 0x10,
+	/* 0x45 VCOMH 4.425v, 0x15 VCOML -1.975*/
+	.vcom_1 = {0x45, 0x15},
+	/* 0x90 offset voltage, VMH-48, VML-48 */
+	.vcom_2 = 0x90,
+	/*
+	 * 0xc8 Row Address Order, Column Address Order
+	 * BGR 1
+	 */
+	.address_mode = 0xc8,
+	.g3amma_en = 0x00,
+	/*
+	 * 0xc2
+	 * Display Data Path: Memory
+	 * RGB: DE mode
+	 * DOTCLK polarity set (data fetched at the falling time)
+	 */
+	.rgb_interface = ILI9341_RGB_DISP_PATH_MEM |
+			ILI9341_RGB_DE_MODE |
+			ILI9341_RGB_DPL,
+	/*
+	 * 0x0a
+	 * Gate outputs in non-display area: Interval scan
+	 * Determine source/VCOM output in a non-display area in the partial
+	 * display mode: AGND AGND AGND AGND
+	 *
+	 * 0xa7
+	 * Scan Cycle: 15 frames
+	 * fFLM = 60Hz: 255ms
+	 * Liquid crystal type: Normally white
+	 * Gate Output Scan Direction: G1 -> G320
+	 * Source Output Scan Direction: S720 -> S1
+	 *
+	 * 0x27
+	 * LCD Driver Line: 320 lines
+	 *
+	 * 0x04
+	 * PCDIV: 4
+	 */
+	.dfc_2 = {0x0a, 0xa7, 0x27, 0x04},
+	/* column address: 240 */
+	.column_addr = {0x00, 0x00, (ILI9341_COLUMN_ADDR >> 4) & 0xff,
+				ILI9341_COLUMN_ADDR & 0xff},
+	/* page address: 320 */
+	.page_addr = {0x00, 0x00, (ILI9341_PAGE_ADDR >> 4) & 0xff,
+				ILI9341_PAGE_ADDR & 0xff},
+	/*
+	 * Memory write control: When the transfer number of data exceeds
+	 * (EC-SC+1)*(EP-SP+1), the column and page number will be
+	 * reset, and the exceeding data will be written into the following
+	 * column and page.
+	 * Display Operation Mode: RGB Interface Mode
+	 * Interface for RAM Access: RGB interface
+	 * 16- bit RGB interface (1 transfer/pixel)
+	 */
+	.interface = {ILI9341_IF_WE_MODE, 0x00,
+			ILI9341_IF_DM_RGB | ILI9341_IF_RM_RGB},
+	/* DPI: 16 bits / pixel */
+	.pixel_format = ILI9341_PIXEL_DPI_16_BITS,
+	/* Curve Selected: Gamma curve 1 (G2.2) */
+	.gamma_curve = ILI9341_GAMMA_CURVE_1,
+	.pgamma = {0x0f, 0x29, 0x24, 0x0c, 0x0e,
+			0x09, 0x4e, 0x78, 0x3c, 0x09,
+			0x13, 0x05, 0x17, 0x11, 0x00},
+	.ngamma = {0x00, 0x16, 0x1b, 0x04, 0x11,
+			0x07, 0x31, 0x33, 0x42, 0x05,
+			0x0c, 0x0a, 0x28, 0x2f, 0x0f},
+};
+
+static inline struct ili9341 *vpl_to_ili9341(struct vpl *vpl)
+{
+	return container_of(vpl, struct ili9341, vpl);
+}
+
+static void ili9341_dpi_init(struct ili9341 *ili)
+{
+	struct device_d *dev = ili->dev;
+	struct mipi_dbi *dbi = ili->dbi;
+	struct ili9341_config *cfg = (struct ili9341_config *)ili->conf;
+
+	/* Power Control */
+	mipi_dbi_command_stackbuf(dbi, 0xca, cfg->ca, ILI9341_CA_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_POWERB, cfg->power_b,
+				  ILI9341_POWER_B_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_POWER_SEQ, cfg->power_seq,
+				  ILI9341_POWER_SEQ_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_DTCA, cfg->dtca,
+				  ILI9341_DTCA_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_POWERA, cfg->power_a,
+				  ILI9341_POWER_A_LEN);
+	mipi_dbi_command(ili->dbi, ILI9341_PRC, cfg->prc);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_DTCB, cfg->dtcb,
+				  ILI9341_DTCB_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_FRC, cfg->frc, ILI9341_FRC_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_DFC, cfg->dfc_1,
+				  ILI9341_DFC_1_LEN);
+	mipi_dbi_command(dbi, ILI9341_POWER1, cfg->power_1);
+	mipi_dbi_command(dbi, ILI9341_POWER2, cfg->power_2);
+
+	/* VCOM */
+	mipi_dbi_command_stackbuf(dbi, ILI9341_VCOM1, cfg->vcom_1,
+				  ILI9341_VCOM_1_LEN);
+	mipi_dbi_command(dbi, ILI9341_VCOM2, cfg->vcom_2);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, cfg->address_mode);
+
+	/* Gamma */
+	mipi_dbi_command(dbi, ILI9341_3GAMMA_EN, cfg->g3amma_en);
+	mipi_dbi_command(dbi, ILI9341_RGB_INTERFACE, cfg->rgb_interface);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_DFC, cfg->dfc_2,
+				  ILI9341_DFC_2_LEN);
+
+	/* Colomn address set */
+	mipi_dbi_command_stackbuf(dbi, MIPI_DCS_SET_COLUMN_ADDRESS,
+				  cfg->column_addr, ILI9341_COLUMN_ADDR_LEN);
+
+	/* Page address set */
+	mipi_dbi_command_stackbuf(dbi, MIPI_DCS_SET_PAGE_ADDRESS,
+				  cfg->page_addr, ILI9341_PAGE_ADDR_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_INTERFACE, cfg->interface,
+				  ILI9341_INTERFACE_LEN);
+
+	/* Format */
+	mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, cfg->pixel_format);
+	mipi_dbi_command(dbi, MIPI_DCS_WRITE_MEMORY_START);
+	mdelay(200);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, cfg->gamma_curve);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_PGAMMA, cfg->pgamma,
+				  ILI9341_PGAMMA_LEN);
+	mipi_dbi_command_stackbuf(dbi, ILI9341_NGAMMA, cfg->ngamma,
+				  ILI9341_NGAMMA_LEN);
+	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+	mdelay(200);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+	mipi_dbi_command(dbi, MIPI_DCS_WRITE_MEMORY_START);
+
+	dev_info(dev, "Initialized display rgb interface\n");
+}
+
+static int ili9341_dpi_power_on(struct ili9341 *ili)
+{
+	struct device_d *dev = ili->dev;
+	int ret = 0;
+
+	/* Assert RESET */
+	gpiod_set_value(ili->reset_gpio, 1);
+
+	/* Enable power */
+	ret = regulator_bulk_enable(ARRAY_SIZE(ili->supplies),
+				    ili->supplies);
+	if (ret < 0) {
+		dev_err(dev, "unable to enable vcc\n");
+		return ret;
+	}
+	mdelay(20);
+
+	/* De-assert RESET */
+	gpiod_set_value(ili->reset_gpio, 0);
+	mdelay(20);
+
+	return 0;
+}
+
+static int ili9341_dpi_power_off(struct ili9341 *ili)
+{
+	/* Assert RESET */
+	gpiod_set_value(ili->reset_gpio, 1);
+
+	/* Disable power */
+	return regulator_bulk_disable(ARRAY_SIZE(ili->supplies),
+				      ili->supplies);
+}
+
+static void ili9341_dpi_disable(struct ili9341 *ili)
+{
+	mipi_dbi_command(ili->dbi, MIPI_DCS_SET_DISPLAY_OFF);
+}
+
+static int ili9341_dpi_prepare(struct ili9341 *ili)
+{
+	int ret;
+
+	ret = ili9341_dpi_power_on(ili);
+	if (ret < 0)
+		return ret;
+
+	ili9341_dpi_init(ili);
+
+	return ret;
+}
+
+static void ili9341_dpi_enable(struct ili9341 *ili)
+{
+	mipi_dbi_command(ili->dbi, MIPI_DCS_SET_DISPLAY_ON);
+}
+
+static int ili9341_dpi_get_modes(struct ili9341 *ili,
+				 struct display_timings *timings)
+{
+	struct fb_videomode *mode;
+
+	mode = memdup(&ili->conf->mode, sizeof(*mode));
+	if (!mode)
+		return -ENOMEM;
+
+	/*
+	 * These are from the PoV of the display controller, so
+	 * DPL=1 => display samples at positive edge
+	 *       => controller drives at negative edge
+	 */
+	if (ili->conf->rgb_interface & ILI9341_RGB_DPL)
+		mode->display_flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
+	else
+		mode->display_flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
+
+	if (ili->conf->rgb_interface & ILI9341_RGB_EPL)
+		mode->display_flags |= DISPLAY_FLAGS_DE_HIGH;
+	else
+		mode->display_flags |= DISPLAY_FLAGS_DE_LOW;
+
+	/* Set up the polarity */
+	if (ili->conf->rgb_interface & ILI9341_RGB_HSPL)
+		mode->sync |= FB_SYNC_HOR_HIGH_ACT;
+
+	if (ili->conf->rgb_interface & ILI9341_RGB_VSPL)
+		mode->sync |= FB_SYNC_VERT_HIGH_ACT;
+
+	timings->modes = mode;
+	timings->num_modes = 1;
+	return 0;
+}
+
+static int ili9341_ioctl(struct vpl *vpl, unsigned int port,
+			unsigned int cmd, void *ptr)
+{
+	struct ili9341 *ili = vpl_to_ili9341(vpl);
+
+	switch (cmd) {
+	case VPL_PREPARE:
+		return ili9341_dpi_prepare(ili);
+	case VPL_ENABLE:
+		ili9341_dpi_enable(ili);
+		return 0;
+	case VPL_DISABLE:
+		ili9341_dpi_disable(ili);
+		return 0;
+	case VPL_UNPREPARE:
+		return ili9341_dpi_power_off(ili);
+	case VPL_GET_VIDEOMODES:
+		return ili9341_dpi_get_modes(ili, ptr);
+	default:
+		return 0;
+	}
+}
+
+static int ili9341_dpi_probe(struct spi_device *spi, int dc, int reset)
+{
+	struct device_d *dev = &spi->dev;
+	struct ili9341 *ili;
+	int ret;
+
+	ili = kzalloc(sizeof(struct ili9341), GFP_KERNEL);
+	if (!ili)
+		return -ENOMEM;
+
+	ili->dbi = kzalloc(sizeof(struct mipi_dbi), GFP_KERNEL);
+	if (!ili->dbi)
+		return -ENOMEM;
+
+	ili->supplies[0].supply = "vci";
+	ili->supplies[1].supply = "vddi";
+	ili->supplies[2].supply = "vddi-led";
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(ili->supplies),
+				 ili->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dbi_spi_init(spi, ili->dbi, dc);
+	if (ret)
+		return ret;
+
+	ili->reset_gpio = reset;
+	/*
+	 * Every new incarnation of this display must have a unique
+	 * data entry for the system in this driver.
+	 */
+	ili->conf = device_get_match_data(dev);
+	if (!ili->conf) {
+		dev_err(dev, "missing device configuration\n");
+		return -ENODEV;
+	}
+
+	ili->dev = dev;
+	ili->max_spi_speed = ili->conf->max_spi_speed;
+	ili->vpl.node = dev->device_node;
+	ili->vpl.ioctl = ili9341_ioctl;
+
+	return vpl_register(&ili->vpl);
+}
+
+static int ili9341_probe(struct device_d *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int dc, reset;
+
+	reset = gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (!gpio_is_valid(reset) && reset != -ENOENT)
+		dev_err(dev, "Failed to get gpio 'reset'\n");
+
+	dc = gpiod_get(dev, "dc", GPIOD_OUT_LOW);
+	if (!gpio_is_valid(dc) && dc != -ENOENT)
+		dev_err(dev, "Failed to get gpio 'dc'\n");
+
+	return ili9341_dpi_probe(spi, dc, reset);
+}
+
+static const struct of_device_id ili9341_of_match[] = {
+	{
+		.compatible = "st,sf-tc240t-9370-t",
+		.data = &ili9341_stm32f429_disco_data,
+	},
+	{ }
+};
+
+static struct driver_d ili9341_driver = {
+	.name = "panel-ilitek-ili9341",
+	.of_compatible = ili9341_of_match,
+	.probe = ili9341_probe,
+};
+device_spi_driver(ili9341_driver);
+
+MODULE_AUTHOR("Dillon Min <dillon.minfei at gmail.com>");
+MODULE_DESCRIPTION("ILI9341 LCD panel driver");
+MODULE_LICENSE("GPL v2");
-- 
2.30.2




More information about the barebox mailing list