[PATCH v1 2/2] ARM: rpi: set uart0-pl0110 clk to 48MHz

[Sascha Hauer]

On Fri, Jan 14, 2022 at 11:12:46AM +0100, Oleksij Rempel wrote:
> On Fri, Jan 14, 2022 at 09:30:18AM +0100, Sascha Hauer wrote:
> > On Fri, Jan 14, 2022 at 09:21:41AM +0100, Oleksij Rempel wrote:
> > > At least on RPi2 this clock is 48MHz. This issue was not visible,
> > > becouse amba-pl011 driver was not reseting UART controller after
> > > changing baudrate. So, clk settings was not updated for some time.
> > 
> > We have an rpi3 and rpi4 in our lab. Could you give this a test on these
> > boards?
> 
> Yes, rpi3 is tested and rpi4 is currently not supported.

Fine. Ok then, applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |