phy driver

[Barbier, Renaud]

I found a few boards support that fixup. It is likely it will work for the LS1021 AR8033

-----Original Message-----
From: barebox <barebox-bounces at lists.infradead.org> On Behalf Of Barbier, Renaud
Sent: 07 December 2021 18:51
To: Barebox List <barebox at lists.infradead.org>
Subject: phy driver



[**EXTERNAL SOURCE**]:Please verify the source before clicking link or opening attachment.

I am working on a LS1021A currently booting from SPI NOR.
I am having difficulties to get the network port working.
Issue is that the PHY AR8033 is not initialized properly and even though I get the correct speed/duplex at first (1000FD), no data go through.
Clearing/writing 0x100 to the phy control register then gives the lowest speed/duplex(10HD) and ping works.

The at803.c phy driver is now enabled but I do not see the driver probe function being called and neither mdio_bus_match.
I see a few examples of device trees to add the properties found in the driver. What else am I missing for the at803 to be used.

Cheers,
Renaud



_______________________________________________
barebox mailing list
barebox at lists.infradead.org
https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.infradead.org%2Fmailman%2Flistinfo%2Fbarebox&data=04%7C01%7Crenaud.barbier%40abaco.com%7C06b9c64b270c4397a42108d9b9b2c183%7Ce6f27451899d4d0db8fa88baafa551a7%7C0%7C0%7C637744999676441621%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=OxSU%2BM3PvBjZKm4hJ9vK7Km%2Fjq2dLj3k%2BZUbLdsDv0Q%3D&reserved=0