[PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
Ahmad Fatoum
a.fatoum at pengutronix.de
Tue Apr 13 12:07:58 BST 2021
On 13.04.21 13:03, Lars Pedersen wrote:
> Hello Ahmad.
>
> On Tue, 13 Apr 2021 at 12:09, Ahmad Fatoum <a.fatoum at pengutronix.de> wrote:
>>
>> Hi,
>>
>> On 13.04.21 11:23, Lars Pedersen wrote:
>>> Select CONFIG_POWER_RESET_GPIO_RESTART for Kamstrup mx7 concentrator
>>> board.
>>>
>>> Signed-off-by: Lars Pedersen <lapeddk at gmail.com>
>>> Reviewed-by: Bruno Thomsen <bruno.thomsen at gmail.com>
>>> ---
>>> Requires patch ARM: i.MX: Kamstrup mx7 concentrator board support
>>>
>>> arch/arm/mach-imx/Kconfig | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
>>> index cc73d0a0d..4ee8ffe4b 100644
>>> --- a/arch/arm/mach-imx/Kconfig
>>> +++ b/arch/arm/mach-imx/Kconfig
>>> @@ -530,6 +530,7 @@ config MACH_KAMSTRUP_MX7_CONCENTRATOR
>>> bool "Kamstrup i.MX7 Concentrator"
>>> select ARCH_IMX7
>>> select ARM_USE_COMPRESSED_DTB
>>> + select CONFIG_POWER_RESET_GPIO_RESTART
>>
>> Sorry, no CONFIG_ in Kconfig files. ^^
>
> Heh okay :) Then lets stay with the v2 patch and disregard the patch
> fix in Kconfig.
Sure, ss you like. Just for clarification, what I meant was that in Kconfig
files symbols don't have the CONFIG_ prefix. That's only used outside
(e.g. from Makefile or C preprocessor).
Cheers,
Ahmad
>
>>
>> Cheers,
>> Ahmad
>>
>>>
>>> config MACH_NXP_IMX6ULL_EVK
>>> bool "NXP i.MX6ull EVK Board"
>>>
>>
>> --
>> Pengutronix e.K. | |
>> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list