[PATCH 06/17] MIPS: configs: qemu-malta: enable Virt I/O

[Ahmad Fatoum]

Virt I/O over PCI is usable on both the MIPS little- and big-endian
Malta boards emulated by QEMU. Enable Virt I/O PCI and their
dependencies.

Cc: Antony Pavlov <antonynpavlov at gmail.com>
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 arch/mips/configs/qemu-malta_defconfig | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/mips/configs/qemu-malta_defconfig b/arch/mips/configs/qemu-malta_defconfig
index b9994f392c47..3ef2fc302a20 100644
--- a/arch/mips/configs/qemu-malta_defconfig
+++ b/arch/mips/configs/qemu-malta_defconfig
@@ -1,5 +1,6 @@
 CONFIG_BOARD_QEMU_MALTA=y
 CONFIG_IMAGE_COMPRESSION_XZKERN=y
+CONFIG_MMU=y
 CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x400000
 CONFIG_STACK_SIZE=0x7000
 CONFIG_EXPERIMENTAL=y
@@ -10,13 +11,14 @@ CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
 CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_CONSOLE_ALLOW_COLOR=y
-CONFIG_PARTITION=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_BTHREAD=y
 CONFIG_CMD_DMESG=y
 CONFIG_LONGHELP=y
 CONFIG_CMD_IOMEM=y
 CONFIG_CMD_IMD=y
 CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_BTHREAD=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_LOADB=y
 CONFIG_CMD_LOADY=y
@@ -59,6 +61,7 @@ CONFIG_NET_NFS=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_OFDEVICE=y
 CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_DRIVER_NET_RTL8139=y
 # CONFIG_SPI is not set
 CONFIG_I2C=y
@@ -69,12 +72,19 @@ CONFIG_DRIVER_CFI=y
 # CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set
 # CONFIG_DRIVER_CFI_BANK_WIDTH_2 is not set
 CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+CONFIG_VIRTIO_BLK=y
 CONFIG_VIDEO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_DRIVER_VIDEO_BOCHS_PCI=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_HWRNG=y
+CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_GPIO_MALTA_FPGA_I2C=y
 CONFIG_PCI=y
 CONFIG_PCI_DEBUG=y
+CONFIG_VIRTIO_PCI=y
 CONFIG_FS_CRAMFS=y
 CONFIG_FS_TFTP=y
 CONFIG_FS_FAT=y
-- 
2.29.2