[PATCH v1 5/6] ARM: at91: add sama5d3_lowlevel_init() helpers

[Oleksij Rempel]

This code can be potentially reused with other sama5d3 based boards

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 arch/arm/mach-at91/Makefile                  |  1 +
 arch/arm/mach-at91/include/mach/sama5d3_ll.h | 24 ++++++++++++++
 arch/arm/mach-at91/sama5d3_ll.c              | 34 ++++++++++++++++++++
 3 files changed, 59 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/sama5d3_ll.h
 create mode 100644 arch/arm/mach-at91/sama5d3_ll.c

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 9cfba28fa0..c895af7a2f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o sama5d3_devices.o
 endif
 lwl-$(CONFIG_SOC_SAMA5D2)	+= sama5d2_ll.o
 obj-$(CONFIG_SOC_SAMA5D2)	+= sama5d2.o
+lwl-$(CONFIG_SOC_SAMA5D3)	+= sama5d3_ll.o
 obj-$(CONFIG_SOC_AT91SAM9G20) += at91sam9260.o at91sam9260_devices.o
 obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o at91sam9g45_devices.o
 obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o at91sam9x5_devices.o
diff --git a/arch/arm/mach-at91/include/mach/sama5d3_ll.h b/arch/arm/mach-at91/include/mach/sama5d3_ll.h
new file mode 100644
index 0000000000..b5b6b5d820
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/sama5d3_ll.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef __SAMA5D3_LL_H__
+#define __SAMA5D3_LL_H__
+
+#include <mach/at91_pmc_ll.h>
+#include <mach/debug_ll.h>
+#include <mach/early_udelay.h>
+
+void sama5d3_lowlevel_init(void);
+
+static inline void sama5d3_pmc_enable_periph_clock(int clk)
+{
+	at91_pmc_enable_periph_clock(IOMEM(SAMA5D3_BASE_PMC), clk);
+}
+
+/* requires relocation */
+static inline void sama5d3_udelay_init(unsigned int msc)
+{
+	early_udelay_init(IOMEM(SAMA5D3_BASE_PMC), IOMEM(SAMA5D3_BASE_PIT),
+			  SAMA5D3_ID_PIT, msc, AT91_PMC_LL_SAMA5D3);
+}
+
+#endif /* __SAMA5D3_LL_H__ */
diff --git a/arch/arm/mach-at91/sama5d3_ll.c b/arch/arm/mach-at91/sama5d3_ll.c
new file mode 100644
index 0000000000..4650593699
--- /dev/null
+++ b/arch/arm/mach-at91/sama5d3_ll.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause
+// SPDX-FileCopyrightText: 2017, Microchip Corporation
+
+#include <mach/at91_wdt.h>
+#include <mach/barebox-arm.h>
+#include <mach/sama5d3_ll.h>
+
+void sama5d3_lowlevel_init(void)
+{
+	arm_cpu_lowlevel_init();
+
+	at91_wdt_disable(IOMEM(SAMA5D3_BASE_WDT));
+	at91_pmc_init(IOMEM(SAMA5D3_BASE_PMC), AT91_PMC_LL_SAMA5D3);
+
+	/* At this stage the main oscillator
+	 * is supposed to be enabled PCK = MCK = MOSC
+	 */
+
+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
+	at91_pmc_cfg_plla(IOMEM(SAMA5D3_BASE_PMC), AT91_PMC3_MUL_(43)
+			  | AT91_PMC_OUT_0 | AT91_PMC_PLLCOUNT
+			  | AT91_PMC_DIV_BYPASS, AT91_PMC_LL_SAMA5D3);
+
+	/* Initialize PLLA charge pump */
+	at91_pmc_init_pll(IOMEM(SAMA5D3_BASE_PMC), AT91_PMC_IPLLA_3);
+
+	/* Switch PCK/MCK on Main clock output */
+	at91_pmc_cfg_mck(IOMEM(SAMA5D3_BASE_PMC), AT91SAM9_PMC_MDIV_4
+			 | AT91_PMC_CSS_MAIN, AT91_PMC_LL_SAMA5D3);
+
+	/* Switch PCK/MCK on PLLA output */
+	at91_pmc_cfg_mck(IOMEM(SAMA5D3_BASE_PMC), AT91SAM9_PMC_MDIV_4
+			 | AT91_PMC_CSS_PLLA, AT91_PMC_LL_SAMA5D3);
+}
-- 
2.29.2