[PATCH] ARM: imx51: Remove stale comment

[Sascha Hauer]

On Sat, May 21, 2016 at 09:35:24AM +0300, Alexander Shiyan wrote:
> Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
> ---
>  arch/arm/mach-imx/imx51.c | 19 -------------------
>  1 file changed, 19 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/mach-imx/imx51.c b/arch/arm/mach-imx/imx51.c
> index 70e8971..a6784d0 100644
> --- a/arch/arm/mach-imx/imx51.c
> +++ b/arch/arm/mach-imx/imx51.c
> @@ -83,25 +83,6 @@ int imx51_devices_init(void)
>  	return 0;
>  }
>  
> -/*
> - * Saves the boot source media into the $bootsource environment variable
> - *
> - * This information is useful for barebox init scripts as we can then easily
> - * use a kernel image stored on the same media that we launch barebox with
> - * (for example).
> - *
> - * imx25 and imx35 can boot into barebox from several media such as
> - * nand, nor, mmc/sd cards, serial roms. "mmc" is used to represent several
> - * sources as its impossible to distinguish between them.
> - *
> - * Some sources such as serial roms can themselves have 3 different boot
> - * possibilities (i2c1, i2c2 etc). It is assumed that any board will
> - * only be using one of these at any one time.
> - *
> - * Note also that I suspect that the boot source pins are only sampled at
> - * power up.
> - */
> -
>  #define DP_MFN_800_DIT 60 /* PL Dither mode */
>  
>  /*
> -- 
> 2.4.9
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |