[PATCH 1/4] ARM: ccxmx53: Add support for Digi ccxmx53 board.
Jason Cobham
cobham.jason at gmail.com
Tue Nov 17 20:27:01 PST 2015
Add support for Digi ConnectCore ccxmx53 board based on the i.MX53 SoC.
Tested with a 512M and 1GB module on a JSK dev board.
Signed-off-by: Jason Cobham <cobham.jason at gmail.com>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/ccxmx53/Makefile | 3 +
arch/arm/boards/ccxmx53/board.c | 101 +++++++++
.../ccxmx53/flash-header-imx53-ccxmx53.imxcfg | 67 ++++++
arch/arm/boards/ccxmx53/lowlevel.c | 19 ++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx53-ccxmx53.dts | 15 ++
arch/arm/dts/imx53-ccxmx53.dtsi | 35 ++++
arch/arm/mach-imx/Kconfig | 8 +
dts/src/arm/imx53-ccxmx53.dts | 102 ++++++++++
dts/src/arm/imx53-ccxmx53.dtsi | 226 +++++++++++++++++++++
images/Makefile.imx | 5 +
12 files changed, 583 insertions(+)
create mode 100644 arch/arm/boards/ccxmx53/Makefile
create mode 100644 arch/arm/boards/ccxmx53/board.c
create mode 100644 arch/arm/boards/ccxmx53/flash-header-imx53-ccxmx53.imxcfg
create mode 100644 arch/arm/boards/ccxmx53/lowlevel.c
create mode 100644 arch/arm/dts/imx53-ccxmx53.dts
create mode 100644 arch/arm/dts/imx53-ccxmx53.dtsi
create mode 100644 dts/src/arm/imx53-ccxmx53.dts
create mode 100644 dts/src/arm/imx53-ccxmx53.dtsi
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 2229817..7da8992 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_CANON_A1100) += canon-a1100/
obj-$(CONFIG_MACH_CM_FX6) += cm-fx6/
obj-$(CONFIG_MACH_NITROGEN6X) += boundarydevices-nitrogen6x/
obj-$(CONFIG_MACH_CCMX51) += ccxmx51/
+obj-$(CONFIG_MACH_CCMX53) += ccxmx53/
obj-$(CONFIG_MACH_CFA10036) += crystalfontz-cfa10036/
obj-$(CONFIG_MACH_CHUMBY) += chumby_falconwing/
obj-$(CONFIG_MACH_CLEP7212) += clep7212/
diff --git a/arch/arm/boards/ccxmx53/Makefile b/arch/arm/boards/ccxmx53/Makefile
new file mode 100644
index 0000000..c5be481
--- /dev/null
+++ b/arch/arm/boards/ccxmx53/Makefile
@@ -0,0 +1,3 @@
+obj-y += board.o flash-header-imx53-ccxmx53.dcd.o
+extra-y += flash-header-imx53-ccxmx53.dcd.S flash-header-imx53-ccxmx53.dcd
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/ccxmx53/board.c b/arch/arm/boards/ccxmx53/board.c
new file mode 100644
index 0000000..b86648b
--- /dev/null
+++ b/arch/arm/boards/ccxmx53/board.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2015 Jason Cobham <cobham.jason at gmail.com>
+ *
+ * Board specific file for the Digi ConnectCore ccxmx53 SoM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/sizes.h>
+#include <i2c/i2c.h>
+#include <gpio.h>
+
+#include <generated/mach-types.h>
+#include <mach/imx5.h>
+#include <mach/generic.h>
+#include <mach/imx53-regs.h>
+#include <asm/armlinux.h>
+#include <mach/bbu.h>
+
+#define ccwmx53_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+
+static void ccwmx53_fec_reset(void)
+{
+ gpio_direction_output(ccwmx53_FEC_PHY_RST, 0);
+ mdelay(1);
+ gpio_set_value(ccwmx53_FEC_PHY_RST, 1);
+}
+
+static int ccxmx53_reg_init(void)
+{
+ unsigned char value = 0;
+ struct i2c_adapter *adapter = NULL;
+ struct i2c_client client;
+ int addr = -1, bus = 0;
+
+ /* I2C0 bus */
+ bus = 0;
+
+ /* da9053 device address is 0x68 */
+ addr = 0x68;
+
+ adapter = i2c_get_adapter(bus);
+ if (!adapter){
+ printf("****No I2C Adapter\n");
+ return -ENODEV;
+ }
+
+ client.adapter = adapter;
+ client.addr = addr;
+
+ /* Enable 3.3V ext regulator. This is not supported in dt */
+ value = 0xfa;
+ if (i2c_write_reg(&client, 0x19, &value, 1) < 0){
+ printf("****I2C write failed\n");
+ return -ENOSYS;
+ }
+
+ ccwmx53_fec_reset();
+
+ return 0;
+}
+device_initcall(ccxmx53_reg_init);
+
+static int ccxmx53_late_init(void)
+{
+ if (!of_machine_is_compatible("digi,imx53-ccxmx53"))
+ return 0;
+
+ armlinux_set_architecture(MACH_TYPE_CCMX53);
+
+ barebox_set_model("Digi CCMX53");
+ barebox_set_hostname("ccxmx53");
+
+ imx53_bbu_internal_nand_register_handler("nand",
+ BBU_HANDLER_FLAG_DEFAULT, SZ_512K);
+
+ return 0;
+}
+late_initcall(ccxmx53_late_init);
+
+static int ccxmx53_postcore_init(void)
+{
+ if (!of_machine_is_compatible("digi,imx53-ccxmx53"))
+ return 0;
+
+ imx53_init_lowlevel(800);
+
+ return 0;
+}
+postcore_initcall(ccxmx53_postcore_init);
diff --git a/arch/arm/boards/ccxmx53/flash-header-imx53-ccxmx53.imxcfg b/arch/arm/boards/ccxmx53/flash-header-imx53-ccxmx53.imxcfg
new file mode 100644
index 0000000..6f1cab6
--- /dev/null
+++ b/arch/arm/boards/ccxmx53/flash-header-imx53-ccxmx53.imxcfg
@@ -0,0 +1,67 @@
+loadaddr 0x70000000
+soc imx53
+dcdofs 0x400
+wm 32 0x53fa8554 0x00200000
+wm 32 0x53fa8558 0x00200040
+wm 32 0x53fa8560 0x00200000
+wm 32 0x53fa8564 0x00200040
+wm 32 0x53fa8568 0x00200040
+wm 32 0x53fa8570 0x00200000
+wm 32 0x53fa8574 0x00200000
+wm 32 0x53fa8578 0x00200000
+wm 32 0x53fa857c 0x00200040
+wm 32 0x53fa8580 0x00200040
+wm 32 0x53fa8584 0x00200000
+wm 32 0x53fa8588 0x00200000
+wm 32 0x53fa8590 0x00200040
+wm 32 0x53fa8594 0x00200000
+wm 32 0x53fa86f0 0x00200000
+wm 32 0x53fa86f4 0x00000200
+wm 32 0x53fa86fc 0x00000000
+wm 32 0x53fa8714 0x00000000
+wm 32 0x53fa8718 0x00200000
+wm 32 0x53fa871c 0x00200000
+wm 32 0x53fa8720 0x00200000
+wm 32 0x53fa8724 0x06000000
+wm 32 0x53fa8728 0x00200000
+wm 32 0x53fa872c 0x00200000
+wm 32 0x63fd9088 0x2d313331
+wm 32 0x63fd9090 0x393b3836
+wm 32 0x63fd90f8 0x00000800
+wm 32 0x63fd907c 0x020c0211
+wm 32 0x63fd9080 0x014c0155
+wm 32 0x63fd9018 0x000016d0
+wm 32 0x63fd9000 0xc4110000
+wm 32 0x63fd900c 0x4d5122d2
+wm 32 0x63fd9010 0x92d18a22
+wm 32 0x63fd9014 0x00c70092
+wm 32 0x63fd902c 0x000026d2
+wm 32 0x63fd9030 0x009f000e
+wm 32 0x63fd9008 0x12272000
+wm 32 0x63fd9004 0x00030012
+wm 32 0x63fd901c 0x04008010
+wm 32 0x63fd901c 0x00008032
+wm 32 0x63fd901c 0x00008033
+wm 32 0x63fd901c 0x00008031
+wm 32 0x63fd901c 0x0b5280b0
+wm 32 0x63fd901c 0x04008010
+wm 32 0x63fd901c 0x00008020
+wm 32 0x63fd901c 0x00008020
+wm 32 0x63fd901c 0x0a528030
+wm 32 0x63fd901c 0x03c68031
+wm 32 0x63fd901c 0x00448031
+wm 32 0x63fd901c 0x04008018
+wm 32 0x63fd901c 0x0000803a
+wm 32 0x63fd901c 0x0000803b
+wm 32 0x63fd901c 0x00008039
+wm 32 0x63fd901c 0x0b528138
+wm 32 0x63fd901c 0x04008018
+wm 32 0x63fd901c 0x00008028
+wm 32 0x63fd901c 0x00008028
+wm 32 0x63fd901c 0x0a528038
+wm 32 0x63fd901c 0x03c68039
+wm 32 0x63fd901c 0x00448039
+wm 32 0x63fd9020 0x00005800
+wm 32 0x63fd9058 0x00022225
+wm 32 0x63fd901c 0x00000000
+wm 32 0x63fd9040 0x04b80003
diff --git a/arch/arm/boards/ccxmx53/lowlevel.c b/arch/arm/boards/ccxmx53/lowlevel.c
new file mode 100644
index 0000000..3b37dff
--- /dev/null
+++ b/arch/arm/boards/ccxmx53/lowlevel.c
@@ -0,0 +1,19 @@
+#include <common.h>
+#include <mach/esdctl.h>
+#include <mach/generic.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_imx53_ccxmx53_start[];
+
+ENTRY_FUNCTION(start_imx53_ccxmx53, r0, r1, r2)
+{
+ void *fdt;
+
+ imx5_cpu_lowlevel_init();
+ arm_setup_stack(0xf8020000 - 8);
+
+ fdt = __dtb_imx53_ccxmx53_start - get_runtime_offset();
+
+ imx53_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c87bd93..a03e490 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -18,6 +18,7 @@ pbl-dtb-$(CONFIG_MACH_EMBEST_RIOTBOARD) += imx6s-riotboard.dtb.o
pbl-dtb-$(CONFIG_MACH_EMBEDSKY_E9) += imx6q-embedsky-e9.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX51_PDK) += imx51-babbage.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX53_LOCO) += imx53-qsb.dtb.o imx53-qsrb.dtb.o
+pbl-dtb-$(CONFIG_MACH_CCMX53) += imx53-ccxmx53.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += imx53-voipac-bsb.dtb.o
pbl-dtb-$(CONFIG_MACH_GK802) += imx6q-gk802.dtb.o
pbl-dtb-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += kirkwood-guruplug-server-plus-bb.dtb.o
diff --git a/arch/arm/dts/imx53-ccxmx53.dts b/arch/arm/dts/imx53-ccxmx53.dts
new file mode 100644
index 0000000..ac6103a
--- /dev/null
+++ b/arch/arm/dts/imx53-ccxmx53.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <arm/imx53-ccxmx53.dts>
+#include "imx53-ccxmx53.dtsi"
+#include "imx53.dtsi"
diff --git a/arch/arm/dts/imx53-ccxmx53.dtsi b/arch/arm/dts/imx53-ccxmx53.dtsi
new file mode 100644
index 0000000..6f76d28
--- /dev/null
+++ b/arch/arm/dts/imx53-ccxmx53.dtsi
@@ -0,0 +1,35 @@
+/ {
+ chosen {
+ linux,stdout-path = &uart1;
+
+ environment at 0 {
+ compatible = "barebox,environment";
+ device-path = &nfc, "partname:environment";
+ };
+ };
+};
+
+&nfc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "barebox";
+ reg = <0x0 0x80000>;
+ };
+
+ partition at 1 {
+ label = "environment";
+ reg = <0x80000 0x80000>;
+ };
+
+ partition at 2 {
+ label = "kernel";
+ reg = <0x100000 0x400000>;
+ };
+
+ partition at 3 {
+ label = "rootfs";
+ reg = <0x500000 0x07B00000>;
+ };
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0a7b517..511a8ef 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -27,6 +27,7 @@ config ARCH_TEXT_BASE
default 0x7ff00000 if MACH_TQMA53
default 0x97f00000 if MACH_TX51
default 0x97f00000 if MACH_CCMX51
+ default 0x7ff00000 if MACH_CCMX53
default 0x4fc00000 if MACH_SABRELITE
default 0x8fe00000 if MACH_TX53
default 0x97f00000 if MACH_EFIKA_MX_SMARTBOOK
@@ -246,6 +247,13 @@ config MACH_FREESCALE_MX51_PDK
select DRIVER_SPI_IMX
select MFD_MC13XXX
+config MACH_CCMX53
+ bool "Digi ConnectCore i.MX53"
+ select ARCH_IMX53
+ help
+ Say Y here if you are using the Digi ConnectCore ccxmx53
+ series SoM
+
config MACH_FREESCALE_MX53_LOCO
bool "Freescale i.MX53 LOCO"
select ARCH_IMX53
diff --git a/dts/src/arm/imx53-ccxmx53.dts b/dts/src/arm/imx53-ccxmx53.dts
new file mode 100644
index 0000000..178f481
--- /dev/null
+++ b/dts/src/arm/imx53-ccxmx53.dts
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-ccxmx53.dtsi"
+
+/ {
+
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-ccxmx53 {
+ pinctrl_hog: hoggrp {
+
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ /* SD2_CD */
+ MX53_PAD_GPIO_4__GPIO1_4 0x1d5
+ /* SD2_WP */
+ MX53_PAD_GPIO_2__GPIO1_2 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ >;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3>;
+ bus-width = <4>,<8>;
+ non-removable;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&iim {
+ barebox,provide-mac-address = <&fec 1 9>;
+};
diff --git a/dts/src/arm/imx53-ccxmx53.dtsi b/dts/src/arm/imx53-ccxmx53.dtsi
new file mode 100644
index 0000000..c89a093
--- /dev/null
+++ b/dts/src/arm/imx53-ccxmx53.dtsi
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Digi ConnectCore ccxmx53";
+ compatible = "digi,imx53-ccxmx53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-ccxmx53 {
+ pinctrl_hog: hoggrp {
+
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: dialog at 68 {
+ compatible = "dlg,da9053-aa";
+ reg = <0x68>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "BUCKCORE";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "BUCKPRO";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "BUCKMEM";
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1580000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-name = "BUCKPERI";
+ regulator-min-microvolt = <2370000>;
+ regulator-max-microvolt = <2630000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4_2v775";
+ regulator-min-microvolt = <2770000>;
+ regulator-max-microvolt = <2780000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7_2v75";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8_1v8";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9_1v5";
+ regulator-min-microvolt = <1450000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-name = "ldo10_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
diff --git a/images/Makefile.imx b/images/Makefile.imx
index a09afd6..98eb9a1 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -76,6 +76,11 @@ CFG_start_imx53_loco_r.pblx.imximg = $(board)/freescale-mx53-qsb/flash-header-im
FILE_barebox-freescale-imx53-loco-r.img = start_imx53_loco_r.pblx.imximg
image-$(CONFIG_MACH_FREESCALE_MX53_LOCO) += barebox-freescale-imx53-loco-r.img
+pblx-$(CONFIG_MACH_CCMX53) += start_imx53_ccxmx53
+CFG_start_imx53_ccxmx53.pblx.imximg = $(board)/ccxmx53/flash-header-imx53-ccxmx53.imxcfg
+FILE_barebox-imx53-ccxmx53.img = start_imx53_ccxmx53.pblx.imximg
+image-$(CONFIG_MACH_CCMX53) += barebox-imx53-ccxmx53.img
+
pblx-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += start_imx53_vmx53
CFG_start_imx53_vmx53.pblx.imximg = $(board)/freescale-mx53-vmx53/flash-header-imx53-vmx53.imxcfg
FILE_barebox-freescale-imx53-vmx53.img = start_imx53_vmx53.pblx.imximg
--
1.9.1
More information about the barebox
mailing list