[PATCH] wdog: imx-wd: watchdog cannot be disabled again
Sascha Hauer
s.hauer at pengutronix.de
Thu Nov 12 23:54:42 PST 2015
On Thu, Nov 12, 2015 at 01:18:55PM +0100, Stefan Christ wrote:
> The i.MX21/i.MX6 watchdog cannot be disabled after it was activated.
> Bit 2 (WDE) cannot be set to 0 again. Notify the user about that by
> returning -ENOSYS.
>
> Signed-off-by: Stefan Christ <s.christ at phytec.de>
> ---
> drivers/watchdog/imxwd.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c
> index dd11a62..bb0d2db 100644
> --- a/drivers/watchdog/imxwd.c
> +++ b/drivers/watchdog/imxwd.c
> @@ -97,14 +97,14 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, int timeout)
>
> dev_dbg(priv->dev, "%s: %d\n", __func__, timeout);
>
> - if (!timeout || timeout > 128)
> + if (timeout < 0 || timeout > 128)
> return -EINVAL;
>
> - if (timeout > 0)
> - val = ((timeout * 2 - 1) << 8) | IMX21_WDOG_WCR_SRS |
> - IMX21_WDOG_WCR_WDA;
> - else
> - val = 0;
> + if (timeout == 0) /* bit 2 (WDE) cannot be set to 0 again */
> + return -ENOSYS;
> +
> + val = ((timeout * 2 - 1) << 8) | IMX21_WDOG_WCR_SRS |
> + IMX21_WDOG_WCR_WDA;
>
> writew(val, priv->base + IMX21_WDOG_WCR);
> writew(IMX21_WDOG_WCR_WDE | val, priv->base + IMX21_WDOG_WCR);
> --
> 1.9.1
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list