[PATCH v2] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM

[Sascha Hauer]

On Mon, Nov 09, 2015 at 10:02:51AM +0100, Stefan Christ wrote:
> From: Christian Hemp <c.hemp at phytec.de>
> 
> Add Phytec phyCORE-i.MX6 SOM.
>      - imx6dl-phytec-phycore-som-nand
>         - 256GB RAM on 1 Bank with 32Bit
>         - 10/100MBit Ethernet
>         - NAND
>         - SD
>         - UART
> 
> Signed-off-by: Stefan Christ <s.christ at phytec.de>
> Signed-off-by: Christian Hemp <c.hemp at phytec.de>
> ---
> v2: add '#include <arm/imx6dl.dtsi>' in dts to fix compile error
> ---
>  arch/arm/boards/phytec-som-imx6/board.c            |  6 +-
>  .../flash-header-phytec-pcm058dl-256mb.imxcfg      |  8 ++
>  .../phytec-som-imx6/flash-header-phytec-pcm058dl.h | 98 ++++++++++++++++++++++
>  arch/arm/boards/phytec-som-imx6/lowlevel.c         |  1 +
>  arch/arm/dts/Makefile                              |  3 +-
>  arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts    | 63 ++++++++++++++
>  images/Makefile.imx                                |  5 ++
>  7 files changed, 181 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058dl-256mb.imxcfg
>  create mode 100644 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058dl.h
>  create mode 100644 arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |