[PATCH 10/10] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM

[Stefan Christ]

Hi,

> 
> Applied all except this one.
> 
> This patch misses something. Compilation fails with:
> 
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8 Label or path ecspi1 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5 Label or path fec not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6 Label or path gpmi not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6 Label or path i2c3 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6 syntax error
> 
> Sascha

Ups. I'll send a v2.

Mit freundlichen Grüßen / Kind regards,
	Stefan Christ

On Mon, Nov 09, 2015 at 07:45:26AM +0100, Sascha Hauer wrote:
> On Fri, Nov 06, 2015 at 11:21:58AM +0100, Stefan Christ wrote:
> > From: Christian Hemp <c.hemp at phytec.de>
> > 
> > Add Phytec phyCORE-i.MX6 SOM.
> >      - imx6dl-phytec-phycore-som-nand
> >         - 256GB RAM on 1 Bank with 32Bit
> >         - 10/100MBit Ethernet
> >         - NAND
> >         - SD
> >         - UART
> > 
> > Signed-off-by: Stefan Christ <s.christ at phytec.de>
> > Signed-off-by: Christian Hemp <c.hemp at phytec.de>
> > ---
> 
> Applied all except this one.
> 
> This patch misses something. Compilation fails with:
> 
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8 Label or path ecspi1 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5 Label or path fec not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6 Label or path gpmi not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6 Label or path i2c3 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6 syntax error
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |