[PATCH] net: phy: wait for link OK after successfull autonegotiation
Sascha Hauer
s.hauer at pengutronix.de
Mon Nov 2 00:00:32 PST 2015
On Sat, Oct 31, 2015 at 02:07:52PM +0100, Anton Bondarenko wrote:
> It may take some time for PHY to indicate link OK status after
> autonegotiation completed. This change addresses this case
> and prevent network commands fails due to the delay.
>
> Signed-off-by: Anton Bondarenko <anton.bondarenko.sama at gmail.com>
> ---
> drivers/net/phy/phy.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 2b3c5e2..73569f3 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -502,13 +502,17 @@ int phy_wait_aneg_done(struct phy_device *phydev)
> return 0;
>
> while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND)) {
> - if (phy_aneg_done(phydev) > 0) {
> - phydev->link = 1;
> + if (phy_aneg_done(phydev) > 0)
> + break;
> + }
> +
> + genphy_update_link(phydev);
> + while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND)) {
> + if (phydev->link == 1)
> return 0;
> - }
> + genphy_update_link(phydev);
> }
The additional call to genphy_update_link() before the loop shouldn't be
necessary, right? Or to be 100% correct you could use a do {} while loop
to make sure to always call genphy_update_link() at least once.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list