Problems with pyhBoard-Wega-AM335x

[Sascha Hauer]

On Mon, Jul 07, 2014 at 08:04:55AM -0400, Robert P. J. Day wrote:
> On Mon, 7 Jul 2014, Sascha Hauer wrote:
> 
> > On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote:
> > > Hello Rolf,
> > >
> > > thank you very much...
> > > after I selected the mentioned entry in the menu the problem was solved...
> > > but the board do not prompt any thing on the UART1... so I do not
> > > know if barebox is loaded
> >
> > When using mainline barebox please build the am335x_mlo_defconfig for
> > the MLO and the am335x_defconfig for the main binary. The images
> > are then found under:
> 
>   from memory, i noticed earlier that when i configured for
> am335x_defconfig, then did "make menuconfig", i was asked whether i
> wanted to build the MLO file as well. does that mean i can generate
> both the MLO and second stage from a single build? or am i
> misunderstanding what i saw?

The option has no effect when OMAP_MULTI_BOARDS is enabled which is the
case for the am335x boards. I just sent out a patch to hide the options.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |