Problems with pyhBoard-Wega-AM335x

[Robert P. J. Day]

On Mon, 7 Jul 2014, Sascha Hauer wrote:

> On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote:
> > Hello Rolf,
> >
> > thank you very much...
> > after I selected the mentioned entry in the menu the problem was solved...
> > but the board do not prompt any thing on the UART1... so I do not
> > know if barebox is loaded
>
> When using mainline barebox please build the am335x_mlo_defconfig for
> the MLO and the am335x_defconfig for the main binary. The images
> are then found under:

  from memory, i noticed earlier that when i configured for
am335x_defconfig, then did "make menuconfig", i was asked whether i
wanted to build the MLO file as well. does that mean i can generate
both the MLO and second stage from a single build? or am i
misunderstanding what i saw?

rday

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================